23522 1APR95-0025 T1000/1200/3000 Dmgif GIF/JPG viewer for DeskMate From: TVDOG To: ALL Dmgif.pdm, my GIF/JPG viewer for DeskMate, has been almost finished for quite a while now :-D, but I'm closing in. Everything in the way of options/features has been implemented; lacking are online help, a DOS runtime version, and an install program. Lately I've been optimizing some, trying to match Cshow in speed. JPG is 40% faster, but GIF is still somewhat slower. Anyway, I've sent the program to 3 people now, and only one of them has helped me with bug reports. I'd appreciate it if some of you would check out the program and let me know of any problems you find. Dmgif lacks the "slide-show" feature of Cshow, but it has a number of additional features of its own. It has the familiar, easy-to-use DeskMate interface, including pull-down menus, dialog boxes, and mouse support. Up to 5 levels of zooming are allowed, with both keyboard and mouse methods. Panning over the image can likewise be done with either mouse or keyboard. The image can be dithered or no, and can be rescaled for the display or mapped pixel-for-pixel. JPG's can be loaded in grayscale (faster, better looking) or in color, and pictures can be displayed in gray or color (gray being faster). Pictures can be adjusted for color, even on displays that lack hardware palette support; in color, red, green, and blue brightness and saturation can be adjusted, and in gray, brightness and contrast can be. Your desired defaults are saved in a standard configuration file saved in the DMCONFIG directory. Installation is easy; all that is required is to place Dmgif.pdm in the directory where you noional RAM is available, a swap file will be used; the file will be placed in the directory specified by the TEMP or TMP environment variable, or, if none, in the root directory of the hard drive with the most space. In extremis, a second floppy drive could be used by setting the TEMP or TMP variable, but performance would be poor. You can configure the amount of swap space, and whether each type of storage should be used. Dmgif uses the DeskMate video and print drivers and supports all DeskMate- supported video modes and print drivers, which in DM 3.05 include CGA, Hercules, EGA mono, EGA color, VGA, Tandy 1000 640x200x4, Tandy 1000SL/TL/RL 640x200x16, the IBM Graphics Printer, the Epson 24-pin dot matrix printer, the HP Laserjet, and Tandy printers, such as my DMP132 :-). In Tandy 1000 640x200x4 mode (pre-SL), pictures are by default displayed in 4-color grayscale, yielding a better picture than available in either CGA mono or 320x200x16 mode; color is available in this mode as an option (but it doesn't look very good with only 4 colors). Of course, palette adjustment is available on VGA - and on EGA as well. Anyway, I hope to hear from some of you that you would like to try my program and let me know of any problems you encounter. I will email Dmgif.pdm to whoever requests it. As I said above, I need some testers. Ken Udut (no longer on Delphi) has been invaluable in pointing out problems, but he has been the only one. This will eventually be a shareware program, I think, but not limited or crippled in any way. (I might add support for some non-DeskMate video modes in the future.) If you can help me in this, please write: Jeffrey L. Hayes 130 Forest Ave., Lot 1 Orono, Me. 04473 ph. (207) 866-7903 Internet: tvdog@delphi.com I appreciate your support! -*- 23523 1APR95-1927 T1000/1200/3000 RE: Tandy 1000 TX (Re: Msg 23521) From: DDC777 To: TVDOG > On the standard, non-Cleburn version, DIP > switch 2 swaps IRQ 2 and 5. By default, the TX uses IRQ 2 for the hard > drive and IRQ 5 for the video; IBM standard is the opposite. Thus DIP > switch 2 must be turned OFF for a standard hard drive controller to be > used. I'm not clear on whether this works in the Cleburn version. > > Jeff (tvdog) > I wish I had this information about 6 months ago, been trying to install a Miniscribe 40 meg in a TX 1000, finally figured out it was an interuppt problem, right now I have switch 2 and 4 turned off and the machine finally recognizes it has a hard drive Darrell Cook ddc777@delphi.com Lafayette, CO -*- 23524 2APR95-1351 T1000/1200/3000 RE: Tandy 1000 TX (Re: Msg 23523) From: TVDOG To: DDC777 I'm glad it works. Question: why did you turn switch 4 off? According to my information, that disables the printer interrupt. Jeff (tvdog) -*- 23525 2APR95-1617 T1000/1200/3000 RE: Tandy 1000 TX (Re: Msg 23524) From: DDC777 To: TVDOG > I'm glad it works. Question: why did you turn switch 4 off? According > to my information, that disables the printer interrupt. > > Jeff (tvdog) > Jeff what I did was turn off switches until I got the combination that worked. checked everything out and the printer still works. another strange quirk of Tandy's? :- ) I do remember now that when I ran a program called Snooper on this machine that it did show the printer using interrupt 7 which should be switch #4, right? I'm confused I have a couple of questions maybe you could answer, 1) I've got a Seagate 40 meg that I would like to install in the machine too. Do you suppose the power supply would handle both drives? 2) also have a PS from an IBM 8088 that seems to handle 2 HDD's just fine and thought about installing it in the Tandy but it has 2- 6 lead connectors, using 11 leads and the Tandy has only 9 connectors ( doesn't seem to have a power good lead ??) do you suppose there's a way to switch these power supplies? Might be a dumb idea, what are your thoughts? Darrell Cook ddc777@delphi.com Lafayette, CO -*- 23526 2APR95-2112 T1000/1200/3000 RE: Dmgif GIF/JPG viewer for DeskMate (Re: Msg 23522) From: WESF To: TVDOG I would be glad to test your program out. Just email me a copy! Wesley -*- 23527 2APR95-2132 T1000/1200/3000 RE: Tandy 1000 TX (Re: Msg 23525) From: TVDOG To: DDC777 Most programs, including DOS, don't use the printer interrupt. It will probably work with DIP switch 4 either on or off, most of the time. I just wondered why you did it. The TX can handle 2 *new* 3-1/2" drives with its 67-watt power supply easily. Old drives like your Seagate draw more power, though, particularly 5-1/4" drives (the power is roughly proportional to the size of the drive). The question is whether you have enough 12-volt power to spin up both drives when you turn the computer on; once both are spinning, there's enough. My TL also has a 67-watt power supply, and maybe it's the same. The maximum sustained 12-volt supply is 2.4 amps; at 4.8 amps, the "over current protection" kicks in. You can be over the max (2.4) for a short period of time at startup. My guess (and it *is* a guess) is that 2 old drives will work. If you go over the max, though, it might wear out the power supply over time. I have heard of one person who has 3 (newer) hard drives installed in his TL. I guess (unless someone knows better) I would say, find out the maximum power draw for both drives, and if it's less than 2.4 amps, you're OK. 12-volt power is used for the mechanical parts of the PC: the fan, the floppies, and the hard drives, but as I say you can go a little over the max at startup, as long as you stay under once the drives are spinning. The second question is over my head, but as far as I know it's a matter of connecting the right wires. Tandy is not *that* incompatible. The power supply connector has been a problem for some people swapping motherboards, but some of them must have solved it (though there are replacement motherboards specially made). If you don't get a good answer here (share it if you do!), try in comp.sys.tandy. I'm afraid I go on and only betray my ignorance :-). Today's low-power components (the 80287-XL uses half the power of the original 80287) mean that the 67-watt power supplies are more than adequate. The power draw of a hard drive is proportional to its size: a 5MB full-height 5-1/4" drive draws far more power than a 540MB 1" 3-1/2" drive. Moreover, newer drives of the same physical size draw less power than old ones. jlh (tvdog) -*- 23528 2APR95-2151 T1000/1200/3000 jp 1000 printer From: DUSTDEVIL To: ALL just bought a radioshack jp 1000 printer and hooked it up to my Tandy 1000a computer and nothing happens. I also have a Star nx2430 printer and it works fine. I took it to Radio Shack and it ran fine off the newer models but it will not work off mine, tried new cables also but no use maybe someone can help me here? -*- 23529 2APR95-2249 General Information RE: anybody alive??? (Re: Msg 23518) From: SEAFROMAN To: WESF Hi Wesley - > >Is anyone alive here? Not a message for a week now. Who's got some computer >questions, I want to be challenged... > Alright, here's on for you. Recently, I added a hard drive to my PC which comes with its own driver due to the fact that DOS isn't capable of accessing more than 1024 cylinders on a hard drive, blah, blah, blah...so the installation manual states and that for me to fully utilize this hard drive, I should use this software driver. Now, most everything works as expected except for a couple of programs I have. They just seem to lock when I attempt to execute them. One program, I read the docs included with it and it stated that I should use a command line switch when I start up the program to lower the number of buffers in cases where the program won't run. I did and now the program runs. When I remove the driver for the hard drive, I can't access my new drive but the program will execute from the old setup. The other programs with which I'm having problems seem to be suffering from the same problem. They'll work without the driver installed but won't work with the driver installed. I called the software company that developed the driver and they said to call the hard drive company for support. I called the hard drive company and explained what was happening and they insisted that I hadn't installed the programs correctly and refused to acknowledge that the hard drive driver may be causing conflicts with certain programs. I've been able to employ work arounds but the problem still exists. What do you think? :) Jeff Seawell Lynchburg, Va seafroman@delphi.com -*- 23530 2APR95-2249 T1000/1200/3000 RE: Tandy 1000 TX (Re: Msg 23519) From: SEAFROMAN To: AFRAYLING >We are looking for assistance to get a Tandy Hardcard working with >a Tandy 1000TX. The Hardcard was purchased 4 years ago and has never >worked. It is a standard western digital controller. The computer >refuses to recognize that it is there and there seems to be no >CMOS or setup in which to describe the drive and its parameters. >If anyone knows how to tdo this or has the appropriate setup program >could you please post it to the database and leave a message >Thank you > Years ago, I put a "hardcard" in my 1000TX, although it wasn't a Tandy brand. It was a Seagate model, I believe. I, too, thought I needed a setup program to install the drive but the local Tandy guru stated that the 1000 series has "plug & play" technology (and Microsoft is acting like maybe they thought of this with Win95) and once the drive is in the PC, the computer will recognize that it is there. If your PC doesn't recognize that the hard drive is there, it could be any number of problems. If the drive has never worked, it's possible you've had a bum drive to begin with but it's a little late to do anything about it now. Maybe you should check the drives literature to make sure the jumpers are set correctly. This could cause a problem too. And I'm sure you've tried other slots to make sure. I don't know what else to say. Jeff Seawell Lynchburg, Va seafroman@delphi.com -*- 23531 4APR95-1727 General Information RE: anybody alive??? (Re: Msg 23529) From: TVDOG To: SEAFROMAN You *reduced* the number of buffers and it ran? That's a new one. If I heard that a certain disk driver caused a program not to run, I'd guess that the program was accessing the drive at a low level, perhaps using undocumented features of DOS that the driver didn't support. This, though, sounds like a timing problem. Are the programs in question time- critical (sound/video programs and the like)? What happens if you run the programs, but don't access the drive? Are you using a memory manager, such as EMM386? Jeff (tvdog@delphi.com) -*- 23532 4APR95-1728 T1000/1200/3000 RE: Dmgif GIF/JPG viewer for DeskMate (Re: Msg 23526) From: TVDOG To: WESF Coming soon. Any other takers? Jeff (tvdog@delphi.com) -*- 23533 5APR95-2159 General Information RE: anybody alive??? (Re: Msg 23529) From: WESF To: SEAFROMAN I say I'm lost!!! Would it possibly be due to a lack of memory for the old programs to execute in? That's the only thing I would know of to do... Good luck! Wesley -*- 23534 5APR95-2201 T1000/1200/3000 RE: Dmgif GIF/JPG viewer for DeskMate (Re: Msg 23532) From: WESF To: TVDOG Just dl'd it, now to give it a whirl! Wesley -*- 23535 6APR95-0153 General Information RE: anybody alive??? (Re: Msg 23531) From: SEAFROMAN To: TVDOG > >You *reduced* the number of buffers and it ran? That's a new one. >If I heard that a certain disk driver caused a program not to run, I'd >guess that the program was accessing the drive at a low level, perhaps >using undocumented features of DOS that the driver didn't support. This, >though, sounds like a timing problem. Are the programs in question time- >critical (sound/video programs and the like)? What happens if you run >the programs, but don't access the drive? Are you using a memory manager, >such as EMM386? > Hi Jeff - One of the programs uses command line switches and when I specified less buffers than the default, it would run. This indicated to me some kind of memory conflict of some type. The programs that would have the most problems were those that required large number of files be open simultaneously. The hard disk driver also seemed to respond to changes I would make with settings of SMARTDRV.EXE and EMM386.EXE. When I prevent the driver from loading at IPL, all my programs run fine. There's probably some kind of configuration error but I got tired of experimenting so I just configured the new drive in CMOS, ran an FDISK and FORMAT on the new drive and now I let DOS take care of business and just got rid of the driver that came with the hard drive. I forgot to say that at one point during my experimentation, I had my PC reporting about a full meg more of memory than what I really had. The driver itself has some kind of BIOS overlay that is suppose to supplement the "lacking" functions of the regular BIOS so it might be something in there that triggers the problems I experienced. I just had never experienced something that contrary before and had gotten thoroughly disgusted. Live and learn! Jeff Seawell Lynchburg, Va seafroman@delphi.com -*- 23536 7APR95-0001 General Information RE: anybody alive??? (Re: Msg 23535) From: TVDOG To: SEAFROMAN I'm glad you found a solution. Now that you add this, it does sound like a memory conflict. The driver seems to have been using extended RAM without following the proper protocol for doing so (which would include adjusting the reported amount). At least, that would be my guess. :-) Jeff (tvdog) -*- 23537 7APR95-1622 T1000/1200/3000 RE: Tandy 1000 TX (Re: Msg 23530) From: AFRAYLING To: SEAFROMAN thanks for the help. We are trying to round up the original book to see what jumper setting should be -*- 23538 7APR95-1625 T1000/1200/3000 RE: Tandy 1000 TX (Re: Msg 23521) From: AFRAYLING To: TVDOG just got back here. Thankyou for the advise and I will let you know if it works -*- 23539 7APR95-2231 T1000/1200/3000 Xenix From: WESF To: ALL I have a Tandy 3000HD, and it had in it when I got it a 4 com port card that only works under Xenix. Does anyone here use Xenix? What is it like? Would anyone be interested in this card? Wesley -*- 23540 10APR95-0057 General Information RE: anybody alive??? (Re: Msg 23536) From: SEAFROMAN To: TVDOG > >I'm glad you found a solution. Now that you add this, it does sound like >a memory conflict. The driver seems to have been using extended RAM >without following the proper protocol for doing so (which would include >adjusting the reported amount). At least, that would be my guess. :-) Hi Jeff - -*- 23541 10APR95-0058 General Information RE: anybody alive??? (Re: Msg 23533) From: SEAFROMAN To: WESF > >I say I'm lost!!! Would it possibly be due to a lack of memory for the old >programs to execute in? That's the only thing I would know of to do... > >Good luck! Hi Wesley - I determined the problem originated as a result of using the hard drive driver included with the hard drive. I finally gave up fighting with it and just used DOS to configure and drive it. I guess I'll never really know what the problem was, but at least I got around it. :) Thanks! Jeff Seawell Lynchburg, Va seafroman@delphi.com -*- 23542 10APR95-0058 T1000/1200/3000 RE: Tandy 1000 TX (Re: Msg 23537) From: SEAFROMAN To: AFRAYLING (NR) > >thanks for the help. We are trying to round up the original book >to see what jumper setting should be > I know how important those jumper settings can be as when I recently installed my new hard drive, I forgot to change the jumpers on my primary drive and my system wouldn't recognize that I had an additional drive install. I like to learn things the hard way! :) Jeff Seawell Lynchburg, Va seafroman@delphi.com -*- 23543 10APR95-0058 T1000/1200/3000 RE: Xenix (Re: Msg 23539) From: SEAFROMAN To: WESF >I have a Tandy 3000HD, and it had in it when I got it a 4 com port card that >only works under Xenix. Does anyone here use Xenix? What is it like? Would >anyone be interested in this card? Hi Wesley - Xenix is a variant operating system similar to Unix. Like DOS, Unix became the overwhelming favorite as an operating system for that type of platform. You might be hard pressed to find a user of Xenix. :) However, someone using Unix may be able to put it to use, although I couldn't be 100% certain of that. How's that for sitting on the fence? :) Jeff Seawell Lynchburg, Va seafroman@delphi.com -*- 23544 10APR95-2007 General Information RE: anybody alive??? (Re: Msg 23541) From: WESF To: SEAFROMAN That's the way to do it! Anyway that will work. Wesley -*- 23545 10APR95-2009 T1000/1200/3000 RE: Xenix (Re: Msg 23543) From: WESF To: SEAFROMAN Well, now I know more about Xenix. It would be nice to find someone who would want it. It does me no good, as I am a user of DOS only. Is there much difference between Xenix and Unix? Wesley -*- 23546 13APR95-0319 T1000/1200/3000 RE: Xenix (Re: Msg 23545) From: SEAFROMAN To: WESF >Well, now I know more about Xenix. It would be nice to find someone who would >want it. It does me no good, as I am a user of DOS only. Is there much >difference between Xenix and Unix? Hi Wesley - Not trying to put a damper on your generousity, but how old is it? If it's more than 4-5 years old, it's probably out dated with bigger and better replacements for it now available. Although old components are fun to tinker with. :) I don't think I could fully define the exact differences between Unix and Xenix. Where I work, we have several workstations that are networked together. One of them runs Xenix and we can communicate with it but due to some of the differences in commands, some modifications were required. I guess maybe you could liken it to say comparing MS-DOS, PC-DOS AND DR-DOS. In a lot of ways they are the same but they each have their own nuances that might not be totally compatible with the other. Jeff Seawell Lynchburg, Va seafroman@delphi.com -*- 23547 13APR95-2039 T1000/1200/3000 RE: Xenix (Re: Msg 23546) From: WESF To: SEAFROMAN That card is...hmmm...the whole computer was bought in probably '86. So it ihsoualnd ohladvecaqrudi.t aIddaimngupfgeraatduirnegs twohiale38I6wsaoson, and will have some leftovers ahead ;-). Anyway, to get it, just go to the PC SIG, choose "Databases", choose "New Arrivals", and search for "1000". Go "read dmgif" and download. Jeff (tvdog) -*- 23549 14APR95-2311 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23548) From: WESF To: TVDOG So far, what I think of dmgif, it is a very good program. One thing, I don't know if it is a bug, or you did it on purpose...when you are displaying a gif that is like totally black in the background, it puts in white spots, and makes it a bit lighter than solid black. Same goes with white. Is it supposed to be that way? Doesn't bother me, in some ways I like it, but wasn't sure if it was supposed to be that way or not... Wesley -*- 23550 15APR95-0020 T1000/1200/3000 RE: Xenix (Re: Msg 23547) From: SEAFROMAN To: WESF Hi Wesley - I couldn't really say if the card would work on a Unix box. Another thing to consider is that it may be proprietary equipment that will only work with that particular type of PC. But if you could find someone willing to try it out for you, it wouldn't hurt to try. Jeff Seawell Lynchburg, Va seafroman@delphi.com -*- 23551 15APR95-2144 T1000/1200/3000 RE: Xenix (Re: Msg 23550) From: WESF To: SEAFROMAN It quite possibly could be proprietary...have to take a look at the manual... it was bought and put in a Tandy 3000HD. Maybe eventually I will find someone who would want it. In any case, I have a unique piece of equipment! ;-) Wesley -*- 23552 15APR95-2359 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23549) From: TVDOG To: WESF >So far, what I think of dmgif, it is a very good program. One thing, I >don't know if it is a bug, or you did it on purpose...when you are >displaying a gif that is like totally black in the background, it puts in >white spots, and makes it a bit lighter than solid black. Same goes with >white. Is it supposed to be that way? Doesn't bother me, in some ways I >like it, but wasn't sure if it was supposed to be that way or not... I did notice this on one of the pictures I have, so I guess you could say it's intentional, in the sense that I knew about it and decided to ignore it :-). It's a consequence of the dithering algorithm; if you turn dithering off, the black parts are totally black. Floyd-Steinberg dithering propagates color from the top down all the way to the end. This can be fixed by making the dither algorithm less "eager," but it makes displaying slower. We're talking about maybe 15 extra machine cycles per pixel for gray on a 286, triple that for color - so it's not much. I'll check it out some more, get some timings, but I'll probably take your suggestion. Thanks. So far I have help for all the menus and menu items, and I'm working on the dialog boxes. After that, I have to make help for all the error messages. After that, I have to make an Install.pdm before I have 1.0. So there's time to make more suggestions, if you have them :-). Jeff (tvdog) -*- 23553 17APR95-1830 General Information Tandy 4025 LX From: ENFORCER2 To: ALL My hard drive has died... And I can not find my Tandy 4025 LX Startup disks.... If anyone can help please leave email..... Thank you so much..... Mark W( ENFORCER2 ) -*- 23554 18APR95-1857 T1000/1200/3000 Q:tandy 1000SX upgrading From: PBOCKA To: ALL I have a Tandy 1000 SX w/2 360K drives,a 40 meg hardcard ,1200 modem, and a CM-11 monitor.The DOS version is 3.20.What improvements are possible with this older unit? -*- 23555 18APR95-2047 T1000/1200/3000 GIF VIEWER From: NOBROAD To: ALL I have and use pretty effectively a 1000TX. Could someone recommend a good gif viewer and tell me if the 1000TX is CGA or what? Im sort of a novice. Also, I am using DELITE, does anyone have anything better? Thanks for your help. You can post the answer or Email to me at NOBROAD@delphi.com -*- 23556 18APR95-2236 T1000/1200/3000 RE: GIF VIEWER (Re: Msg 23555) From: POGI To: NOBROAD My 1000tx is cga, I'm using wind which is d-lite for windows, I also used d-lite foe dos, I havent found anything better for use on delphi. Sorry, I dont know any about gif viewers. pogi@delphi.com -*- 23557 19APR95-0342 T1000/1200/3000 RE: Q:tandy 1000SX upgrading (Re: Msg 23554) From: TVDOG To: PBOCKA You can put a 720k drive in it, removing one of the 360k drives, or you can install a secondary floppy controller and put a high-density drive in it. You can install a new hard drive controller and a bigger hard drive, on a hardcard if you like that arrangement. You can install a faster modem, up to 14400, as long as it's internal, or if external, if you install a faster serial port. You can upgrade the video to EGA or VGA. You would need an 8-bit video controller and probably a new monitor, though EGA and VGA cards exist that can use the CM-11. You can upgrade the DOS version. The SX will run pretty much any version of DOS, though there can be problems, so be sure to back up everything first. It might be a good idea to continue using the original DOS, though, since it is made especially for the SX and leaves more memory free for programs than newer versions. You can install an LIM expanded memory card. This will give programs designed to use it additional memory to work with; many programs are designed to use it. You can also use expanded memory as a RAM disk. You can install a math coprocessor. It can speed up some programs substantiallyif they use floating-point math. There are a lot of things you can do with the old girl :-). Make sure that the expansion cards you get are 8-bit, or if 16-bit, that they can function in an 8-bit slot. If you get a new hard drive controller, and it uses IRQ, then you need to be able to set it for IRQ 2, not 5. To install high-density drives, you need a floppy controller that is able to function as secondary; an ordinary floppy controller will not work. If the SX only has the original 384k, you should upgrade the RAM to 640k. This is very cheap to do. jlh (tvdog) -*- 23558 19APR95-0410 T1000/1200/3000 RE: GIF VIEWER (Re: Msg 23555) From: TVDOG To: NOBROAD The TX has Tandy 1000/PC-Jr video, sometimes called TGA. This is a superset of CGA, and any CGA program will work with it. It has a couple extra video modes that CGA doesn't have, and these are nice when viewing GIF's. The TX came with DeskMate. If you like to use it, I encourage you to try the GIF viewer I just wrote, Dmgif. It can be found in the PC-Compatibles SIG databases, New Arrivals section. If DeskMate is not your thing, you can get Cshow. It, too, is in the PC database. Cshow displays pictures in color at 320x200x16 on the TX, while Dmgif displays them, by default, in grayscale at 640x200x4 (color is optional). Dmgif is faster with JPEG's, about the same with GIF's, and doesn't display some other file types that Cshow can. Dmgif also provides zooming, which Cshow doesn't, though Cshow has a "slideshow" feature that Dmgif lacks. (Dmgif's grayscale is clearer than Cshow's color, in my opinion.) Also in the database, you will find Vuimg. Some people swear by it, though when I tried it on my TL I wasn't impressed. Anyway, if you decide you want Cshow because you prefer DOS to DeskMate, I hope you will try the DOS version of Dmgif when I get it done in a few weeks. Actually, there is a DOS version now, but it would be a little awkward to install without the install program I have yet to write. Oh, yes, Dmgif offers color adjustment on the TX, which Cshow does not, and you can print with Dmgif, but you can only print with the registered version of Cshow. The next version of Dmgif will have online help, though the one in the database does not; Cshow has online help. (Why doesn't email work from this forum? :-) Jeff (tvdog) (Who never misses an opportunity to blow his own horn. :-) -*- 23559 19APR95-2106 T1000/1200/3000 RE: GIF VIEWER (Re: Msg 23556) From: NOBROAD To: POGI thanks for response. There are gif viewers, but the results are less than what you would expect for the time and trouble involved. Ill keep searching and let the forum know if I find a good one. However, do you have windows???. I have a 1000tx and my memory does not seem sufficient for windows. -*- 23560 19APR95-2213 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23552) From: WESF To: TVDOG That (the dithering thing) was the only thing I noticed...and in a way I kind of like it. Is there any way you can make it an option to either have or not have it that way? In case it makes any difference, I am running EGA@ 640x350x16. I like the program, in some was better than Vuimg (prog I used before) and in some ways I don't like it better. I would imagine it has taken a lot of work to get completed. Let me know if I could help you out in any way. Wesley -*- 23561 19APR95-2233 T1000/1200/3000 RE: GIF VIEWER (Re: Msg 23559) From: POGI To: NOBROAD --cut-- However, do you have > windows???. I have a 1000tx and my memory does not seem sufficient for > windows. > I ran windows 3.0 for a while but it was slow compaired to deskmate and geos, also windows can only be used in standard mode on the tx. There is a company called EverGreen (I think) that makes a chipset that makes the tx into a 486 I've heard that this will alow it to run windows in protected mode. Probably no matter what you do to the tx it will always be a slow windows performer because of the motherboard. For my uses, the tx and deskmate is a perfect match. -*- 23562 19APR95-2342 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23560) From: TVDOG To: WESF Um ... if you changed your mind about the dithering, it's too late now. I already changed it :-). It affected mainly pictures that were *almost*, but not quite, black. I'm glad it works on EGA as that's something I can't personally test. The dither change only reduced the display speed by about 1.5%, which is difficult to measure. It was a lot of work, but it is winding down. The help file is all done. It still needs to be compressed (this needs to be done by hand), and then the Install program needs to be written. I have some questions about running DeskMate 3.03 on large disk partitions (> 32 meg). The DOS version uses a 3.03 runtime, you see, so I need to find out how it deals with big hard drives. If itT1000/1200/3000 RE: Xenix (Re: Msg 23539) From: STEVE152 To: WESF Wesf, I've heard of the 4 port card. I didn't know Xenix was used on models other than the 16 and 6000. I have a model 6000 running Xenix and that card you have might just work in my system. If you, or anyone has a hard drive that would work on a model 12, 16, or 6000 I am in need of one. Preferably 35 meg or larger. Must be 8 heads, 1024 cyl. unless you have a 2010 controller. Either HD unit or complete external case would be okay. Steve. -*- 23566 21APR95-0555 T1000/1200/3000 RE: deskmate (Re: Msg 23564) From: TVDOG To: NOBROAD >I havea deskmate and the clipboard, but how do you use deskmate with a >gif viewer? Im going to experiment, but help is appreciated. > >Well, I tried DMGIF09. Little did I know that it only runs on deskmate 3.0 >which I do not have. Im running on version 2. Any suggestions on getting >version 3 or is it not worth it? HELP Yep, Dmgif 0.9 requires DeskMate 3. As far as I know, Tandy never let anybody else but them write programs for DeskMate 2, and 2 is incompatible with 3. I can send you Dmgif 1.0, which runs under DOS. The DOS version uses a DeskMate 3 runtime and DeskMate 3 print drivers, video drivers, help, etc. You can copy to the clipboard with it, but without another DM 3 program there's no point in it. The DOS version of Dmgif has a goodly amount of online help about DeskMate 3, as well as being an example - though the applications that come with DM 3 are not as big or complicated. There's no install program yet, so I would have to write you instructions. Basically, the DOS version of Dmgif needs to be in its own directory and be in the path; the pictures can be wherever you want them. If DeskMate 2 ran in text mode (I know some early versions of DeskMate did), I can understand your confusion about how it would work with a .gif viewer. DeskMate 3 runs in graphics mode. If you decide you would like to get DM 3, try calling 1-800-THE-SHACK and asking for DeskMate 3.05, catalog number 25-1351. Jeff (tvdog) -*- 23567 21APR95-2020 T1000/1200/3000 RE: deskmate (Re: Msg 23566) From: NOBROAD To: TVDOG Thanks for the info. I'll wait for your full dos version. -*- 23568 23APR95-1455 General Information RE: Radio Shack - JUNK (Re: Msg 23457) From: MRUPGRADE To: SEAFROMAN I rmember theh good 'ol days in thhe beginning of CoCo. RS sales people were "forbidden" to speak of third party. Same with TRISDOS, etc. I called it the "head in the sand" policy (sound much better then what the head was up). I talked with programmers who wrote print drivers. "You must write ONE FOR EACH RS PINTER, then one for every one else". Typical of their standardization. It's been debatible,, whether they just want to have an item work on ONE COMPUTER ONLY, or just got a deal on weird connectors, etc. that no one else wanted, (because no one else used). Actually I think it's a little of both. ving a problem I took it in to them (no one else can ge t parts, reasonably). They ran it through theh standard cleaning, adj, etc. and retruned it $70+ later. With theh same problem INTACT! So much for a conciencous repair shop. Youo do what yu want,, I JUST WILL NOT BUY anything above a $40 throw away i item from RS. Terry Simons, Des Moines Iowa -*- 23569 23APR95-1658 T1000/1200/3000 RE: Q:tandy 1000SX upgrading (Re: Msg 23554) From: STANB To: PBOCKA In addition to upgrading to VGA on my old 1000TX, the best thing I added was an expanded memory board and 2Mb of memory. I used it primarily for two RAMdisks: one small one to hold a copy of the command processor along with all my batch files to launch various apps, and another larger one for miscellaneous uses such as editing large files, etc. And, I used a portion of the expanded memory for a discache. I have stayed with Tandy DOS 3.21. An upgrade to DOS 3.3 might have been useful, but I never felt the need strongly enough to actually get around to doing it. About a year ago I bought a '486DX2/66 machine, but my daughter uses the old 1000TX at her college. She's perfectly happy with it and its ancient 2400 baud modem. Hope this helps. Stan -*- 23570 23APR95-1809 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23562) From: WESF To: TVDOG Oh well... Yes, it runs just fine on EGA. Are the colors supposed to be different and messed up looking (menus and such, GIFs look just fine)? The colors are different...if you change the default colors or whatever in one of the menus, it will put the deskmate colors back to normal... As for your testing with partitions greater than 32 megs...I have a 35 and a 40 meg drive, both in partitions with DOS 6.2. I did a little cheat with a runtime version of Deskmate that I got with PC Link, as I don't have a copy of Deskmate that I could put on my 3000HD (Was using Deskmate on my 1000SL in ROM) A quick check reveals that it is runtime version 3.05. Does this help any? Wesley -*- 23571 23APR95-1812 T1000/1200/3000 RE: Xenix (Re: Msg 23565) From: WESF To: STEVE152 I have the Tandy 3000HD system....apparently this system was used as a server for several other systems. I think that 4 com port card was used to link the other computers to this one. Would you be interested in that card if you think it will work? As for the hard drive you are looking for, I have an MFM that came in this 3000 that is 5 heads, 989 cylinders...running on a WD-1003-WA2 controller card. I might be willing to part with that drive once I find a replacement if it will work for you...and I can in no way guarantee how long it will work as it has this nice constant high-pitched whine to it... Wesley -*- 23572 24APR95-0124 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23570) From: TVDOG To: WESF The colors are supposed to be different, yes. As the docs explain, I need a nice, known set of colors to dither. You can use the DeskMate default colors, but you can't dither then. The colors are changed back when Dmgif exits. Unfortunately, there is no way to change colors for GIF's but leave the menus the same. How do they seem "messed up," though? I don't think 3.05 has trouble with large partitions. I guess I'll have to find a way to check that myself. Jeff (tvdog) -*- 23573 24APR95-1846 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23572) From: WESF To: TVDOG Well, the colors aren't really messed up, they are just different than the standard yellow and brown and whatever that deskmate uses. The colors are just fine, I was just curious to know if they were supposed to be a different color. If you have a 3.03 or whatever runtime and want me to test it, email me a copy and I'd be glad to test it out for ya! Wesley -*- 23574 24APR95-2305 General Information TRS - 80, Model 4 From: GARY9 To: ALL HI, Recently received a functional TRS-80, Model 4, a TRS - 80 Expansion Interface, no manuals or software, no cables. Is anyone here an old TRS -80 fan? Can you give me directions to a source of items RE: this computer? Appreciate any help. GARY9 on Delphi. -*- 23575 25APR95-0226 General Information RE: Radio Shack - JUNK (Re: Msg 23568) From: SEAFROMAN To: MRUPGRADE Hi Terry - Hmmm...I just don't understand it. They must have different kinds of Radio Shacks west of the Blue Ridge. I've never seem to have the problems that your small, vocal group seems to have had. Back in the days of TRSDOS, the OS market was still up for grabs and Microsoft won out only because it was backed by IBM's muscle and the fact that they (IBM) got ticked off with Digital Research or we may be using CPM right now instead of DOS. True, Tandy's equipment was proprietary but I've never had an instance where I could only use a particular printer with a particular PC model. I have a DMP-105 that I've used on a Model IV, 1000TX and have tested it on my 2100 and it has performed as expected every time. I have a DMP-132 that I've used with my 1000TX and 2100 and haven't had any problems. I think the only thing that Tandy may be guilty of is attempting a little innovation to try and set their PCs apart from the crowd. But your crowd won't have to worry about that anymore because Tandy now sells ASTs and Packard Bells. Jeff Seawell Lynchburg, Va seafroman@delphi.com -*- 23576 25APR95-0605 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23573) From: TVDOG To: WESF Yes, Dmgif changes the screen colors. That's not all that radical, really. First Publisher for DeskMate, when it runs on a Tandy 1000 with original video, changes the video mode to CGA, which not only changes the colors but makes everything mono. First Publisher is a well-admired program for DeskMate. A DeskMate program is compliant with the DeskMate standard as long as it changes the screen colors back to the default when it's done. Dmgif changes them back when it exits, when you task switch, or when you run the Setup accessory. I've thought some, and there isn't a perfectly safe way for you to try the DOS version. I think it's fine, but I'm not absolutely sure, and I don't want to mess up anyone's hard drive. I have to find some way to check it more. If you would, though, I'd like you to check out the online help. It would be safe, but it would only work on your 3000HD, not on the SL (the SL needs a special installation for help to work). Help and DOS version require that certain checks be made before installation, hence the install program. When you add those two, bad things can happen if you don't install it right. Thanks again for your help. Jeff (tvdog) -*- 23577 25APR95-2037 General Information RE: Radio Shack - JUNK (Re: Msg 23575) From: MRUPGRADE To: SEAFROMAN RE> Tandy may have been a little inovative in trying to set their PC's apart rom the croud.... Every part, connector, or thing they make is "apart from the croud". I don't call that innovative,,, I call it "odd ball". Ever try to get a $300 CM-8 monitor to work on anything besides a Color Computer? Unless oyu can manufacture theh interface, it won't. Sorry I don't have more recent examples,,, I got fed up with their propriatory crap. Which is of no benefit to you theh customer. BtW: the monitor I used is a Magnavox 135,, (replaced theh 515), either of which works on a Color Computer, Plugs right in and goes with a PC Compat (including TA 1000's), or an Amiga, or XXX. It too costs $300 And you're right,,, Tandy learned people were tiring of buying their propriatory line. It's an expensive lesson for the buyer. But we learn. My real gripe is Tandy had a real oppertunity to put out some great products. Matter of fact except for thh odd ball, effect of leaving sole support, with one company (theirs) the guts of some of their systems was good. Propriatism,, however never let it go much beyond that. two cents worth,,, (well a full quarter with inflation) Terry g -*- 23578 25APR95-2055 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23576) From: WESF To: TVDOG Well, I will be probably reformatting my old MFM so that i can get the full 40 megs out of it when I get my new 386 motherboard, and at that time, I wouldn't care if it messes up the drive. If you want to send me a copy I can try it out then. I would be glad to test it out for you, just let me know of everything to do right so it doesn't unexpectedly wipe my hard drive :-) Wesley -*- 23579 26APR95-2105 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23562) From: 4800 To: TVDOG On 19-APR 23:42 TVDOG said to WESF about DMGIF... TV> I'm glad it works on EGA [...] [snip] TV> It was a lot of work, but it is winding down. The help file is all TV> done. It still needs to be compressed (this needs to be done by hand), TV> and then the Install program needs to be written. TV> I have some questions about running DeskMate 3.03 on large disk TV> partitions (> 32 meg). The DOS version uses a 3.03 runtime, you see, TV> so I need to find out how it deals with big hard drives. If it TV> doesn't work, I might have to beg Tandy for a 3.05 runtime. Do you TV> (or anyone else) run DOS 4.1 or later and have a large disk? (I still TV> have Tandy DOS 3.30.) I run DESKMATE 3.05 on a Hyundai 286 and a 107meg harddrive with an EGA and DOS 6.22. I really like the DMGIF program. Is there a DESKMATE programmers kit? DMGIF runs the same speed as 2SHOW on my machine, but I like the DESKMATE interface since I use it all day, every day, to keep my customer contacts etc. Good Work. ___ | | 4800@delphi.com ___| '--.-. (secondary: paul.sturm@contrails.com) \ x | \/\, Paul Sturm Arlington, Texas '\ _/ \,| Where are we going, and why am I in this hand basket? You only coast downhill -*- 23580 27APR95-0133 General Information RE: Radio Shack - JUNK (Re: Msg 23577) From: SEAFROMAN To: MRUPGRADE Terry - >>Ever try to get a $300 CM-8 monitor to work on anything besides a >>Color Computer? Unless oyu can manufacture theh interface, it won't. >>Sorry I don't have more recent examples,,, I got fed up with their >>propriatory crap. It sounds to me like your only experience with Tandys was a CoCo and your trying to group everything Tandy has ever made into the same class as a CoCo. If I recall correctly, the CoCo was a highly specific and "uniquely" designed PC and I don't believe it was ever Tandy's intention that this PC (hardware & software) be compatible with anything else. I'm sure if you bought a CoCo, there was a specific monitor, printer etc... that you had to buy with it, not to mention the fact that it was based on a Motorola chip, I believe. On an analytical note: What is the motivation of those individuals that don't like Tandys, to persistantly seek out those that do use Tandys and find it necessary to bare witness to their own perceived dissatisfication? Maybe it's because they are envious of those who can find enjoyment, productivity and use of their Tandys, wondering what they must be doing wrong. Jeff Seawell Lynchburg, Va seafroman@delphi.com -*- 23581 27APR95-2147 T1000/1200/3000 RE: Dmgif.pdm now in PC SIG database (Re: Msg 23579) From: TVDOG To: 4800 > TV> I have some questions about running DeskMate 3.03 on large disk > TV> partitions (> 32 meg). > >I run DESKMATE 3.05 on a Hyundai 286 and a 107meg harddrive with an EGA and >DOS 6.22. I really like the DMGIF program. Thank you. I ought to clarify that I've been talking about the DOS version of Dmgif *1.0*, which nobody has but me. There's no problem with 0.9, which is the version in the Delphi database. I'm going to set 1.0 aside for now. > Is there a DESKMATE programmers >kit? Yes. The "DeskMate Software Development Kit." The catalog number for version 3.03 is TEM-0004. (3.05 is the last and best, but I don't know the number for it.) You might have a hard time getting Tandy to sell itppening with PCM Mag?? And I found myself responding to a message. One-a yur folks started the string. However to set a few things straight,, the CoCo isn't nor ever was any kind of PC. It uses Microsoft Basic,, but there compatibility ends. In it's day,, it was thhe best computer for the buck. But this was due to 3rd party, ENTIRELY. Without 3rd party,, it'ud been a notch under a Vic-20. There attempt at proprietyism,, didn't stop with CoCo. Model I thru IV as well,, were RS for thhe only support. You don't see them around either,, anymore do you? Why my anumosity? When you sell someone a product, then hide support for it,, it tend to have that effect. If you bought a Ford,, and they wouldn set the carberaator,, because you had "gimmix Spark plugs installed",, or insisted that you first remove them,, thaT'ud be a little stupid. But that seemed oto be their attitude on computers. I didn't say they made only one printer for one computer. what I said was when writing graphic drivers,, FOUR DIFFERENT rs PRINTERS NEEDED FOUR DIFFERENT DRIVERS, T then theu'd write one for everyone else. i.e. the others didn't make them so odd-ball as to be non standard. On thehe other hand,, being head of a group (now national) I knew and had a mutual respect foro many RS managers (and loathed a few). And know some well. But perhaps I should thank them,,, Tandy made a real 3rd party buyer out of me. Coponsiquently I rearly consider brand in system componets,, rather simply what works best. And I'm not one-a those guys who think CoCo's are for everyone,, there are other bigger computer which do many things better. The CoCo does fine for me, and my buiusiness. But then I wrote my own software. As you can see,, it does littel for my spelling or typing ability. oh well..... Terry g -*- 23583 28APR95-0442 General Information RE: Radio Shack - JUNK (Re: Msg 23582) From: TVDOG To: MRUPGRADE I trust you won't mind if I fix your typing (mine is sometimes atrocious, and I wouldn't mind if someone fixed it): >My motivation for browsing this SIG, had to do with curiosity as to what >was happening with PCM Mag? And I found myself responding to a message. >One-a yur folks started the string. PCM Magazine is, sadly, dead. I don't remember who started the string, but I'll take your word for it. > However, to set a few things straight, the CoCo isn't nor ever was any >kind of PC. It uses Microsoft Basic, but there compatibility ends. In its >day, it was the best computer for the buck. But this was due to 3rd party, >ENTIRELY. Without 3rd party, it'd been a notch under a Vic-20. It is exactly so with later Tandy's such as the 1000-series. Tandy likes to say, "It can't be done," when what they really mean is, "We don't sell it." > The attempt at "proprietyism" didn't stop with CoCo. Model I thru IV >as well were RS for the only support. You don't see them around either >anymore, do you? Actually, the models I/II/III/IV/4D are classics now, sought by collectors. But perhaps that proves your point. > Why my animosity? When you sell someone a product, then hide support >for it, it tends to have that effect. If you bought a Ford, and they >wouldn't set the carburator because you had "gimmix Spark plugs installed," >or insisted that you first remove them, that'd be a little stupid. But >that seemed to be their [Tandy's] attitude on computers. Unfortunately, that remains Tandy's attitude, for the most part. Perhaps more so now that they don't make computers any more and have no need to cultivate their user base. > I didn't say they made only one printer for one computer. What I said >was, when writing graphic drivers, FOUR DIFFERENT rs PRINTERS NEEDED FOUR >DIFFERENT DRIVERS, then they'd write one for everyone else. I.e., the >others didn't make them so odd-ball as to be non-standard. Come on, now, *everybody* made nonstandard printers in those days, and for that matter, everybody makes them now. Printing has *never* been standardized, completely, beyond the simple printing of the ASCII alphabet. > On the other hand, being head of a group (now national) I knew and had >a mutual respect for many RS managers (and loathed a few). And know some >well. > But perhaps I should thank them - Tandy made a real 3rd party buyer out >of me. Consequently, I rarely consider brands in system components, [but] >rather simply what works best. Good for you. But, then, buying an IBM would have made a 3rd-party buyer out of you too, what with the prices IBM was charging for parts in the 80's. > And I'm not one of those guys who think CoCo's are for everyone - there >are other bigger computers which do many things better. The CoCo does fine >for me and my business. But then I wrote my own software. If you have some software for the CoCo, there are a lot of CoCo owners out there would like to have it. You can upload it to this ftp site: musie.phlab.missouri.edu Put it in the /pub/submissions directory. From Delphi, you can upload uuencoded files (the site maintainer knows about Delphi's problems and uudecodes files he gets from here). Uuencode the file in one part to make it easy for him. Use .uue for the file extension to make it plain. Compress it if CoCo people have some file compression they usually use. Look at us Tandy owners as you look at Jaguar owners. Jaguars are a pain to own - they break down all the time. Tandy's never break down (your CoCo is still running), but they give their owners endless compatibility headaches. But we like our old Tandy's, as you like your CoCo, perhaps because of their many quirks, because of the fascination in finding them out and sharing them. Don't flame us any more - as the proud owner of a CoCo, you're in no position. You're one of us. Jeffrey L. Hayes (tvdog) -*- 23584 28APR95-2334 General Information RE: Radio Shack - JUNK (Re: Msg 23583) From: MRUPGRADE To: TVDOG Hi Jeff, My appoligies, if I seemed to be ragging on Tandy users. My problem really is with Radio Shacks method of marketing. As for the machines and their users,,, it does seem (as you point out), that we are of the same blood. I've watched the marketing of the CoCo both third party and RS for some years. And it is an anomily. What was hard for many to understand is Radio Shack is an electronics store. Not a computer store. While some were dissapointed, Radio Shack didn't cater closer to the computer user,, I realized they also had speakers, HAM equipemnt,, and a wide variety of other items to sell. (and try to know something about). That I understand,, it's the head in the sand (idf we don't make it,, it don't exist) policy that always ticked me. What was laughable was their secrecy from their own sales force. We knew about new products, prices,, etc. before they did. I'd go in and kiddingly ask if they received the new ---- yet? They'd first respond seriously asking, then reply,,, "well, you guys seem to get the information, before we do,, and who knows? I thought you were serious". Perhaps it is that Tandy's like CoCo's weren't for everyone. "Everyone" (back then) goes to K-Mart, or Target, to buy their home hobby computer. Whereas "we" went to a technical oriented store. We are the seekers, the tinkers, the hackers, and the CoCo was not for those of the beaten path,, it was made for us. My software? I did make a full working version Shareware,, but have never liked it on a BBS for downloads. Principally because the various programs in the PAC comprise 97K of code, plus TXT Doc's. It's all interrelated,, and one clitch,, and the 97K becomes near worthless. And too, once downloaded from a pay service,, and you have bought it, in a sence; considering the size. Two bucks will get a disk mailed to anyone who wants it. But allow me to gloat a bit,, as I tell you several PC compat friends who had used it said, "nothing on the PC handled their home books so quickly and simply". Not that it compares,, but that was before Quicken.. Figure it like this,, it was written by a guy who hates bookwork and loves programming. Using defualts and macros,, at every turn possible,, the computer will make the entry for you. And our in ROM Basic runs at speed comforable to your 8 MHZ machines. Yup,, I converted enough to test it. It beat the britches off the 1000. So at our local RS computer center we ran a race. On a simple screen refresh,, my 1.8 MHZ (yeah we tweek 'em too) ran even neck with the then new 8 MHZ Tandy SL. Oh,, I knew I could get a basic complier or used quick basic, etc. But I figured why do I need to buy the software to make a computer do what mine already will do? And stayed with the CoCo. BTW: I did get a chance to know Lonnie somewhat,, and wondered, do you know what Falsoft is doing these days? Til then,,, Terry g -*- 23585 29APR95-0838 Pocket Computers ZPDA a.k.a. "Zoomer" Help From: PZUM To: ALL Have a ZPDA trying to get into DOS (past icons) to play. Speaking of play- ing.... moved some files but can't figure out where they got moved to! Also ... been to several RS stores and called tech support any news on when fax technology will equal/bypass the ad dept. hype? pzum@dellphi if help is available thank you -*-