TANDY 1000 TX  (250-1600)            Settings           Faxback Doc. # 1162

E1-E2     Enables serial port    (standard)
          (remove to disable)
E3-E4     Selects the serial port as a COM-1 device  (standard)
          (remove to select serial port as COM-2 device)
E9-E10    Selects 640K main memory   (standard)
          (remove to select 768K main memory)
E11-E12   Connects printer select signal to parallel port
          (remove to disable printer select signal)  (standard)

*NOTE: Jumper locations E5-E6 and E7-E8 do not have staking pins and provide
       no user options.

Switch S-2:

     #1   OFF     Selects composite monochrome monitor
          ON      Selects color RGB monitor      (standard)
     #2   OFF     Disables on board interrupt 5
          ON      Enables on board interrupt 5   (standard)
     #3   OFF     Disables on board interrupt 6
          ON      Enables on board interrupt 6   (standard)
     #4   OFF     Disables on board interrupt 7
          ON      Enables on board interrupt 7   (standard)

These are user selectable jumper and switch locations.