1400 LT (250-3500) Keyboard Definitions Faxback Doc. # 1432 Your computer's keyboard consists of four sections: the function keys, the typewriter keys, the numeric keypad, and the cursor keys. Function Keys: The function keys at the top of the keyboard are program-specific. Their functions depend on the program you are running. Some of these keys perform special functions when you start the computer, such as: CTRL ALT F12 LCD mode. Pressing this key combination tells the computer to use the built-in LCD screen instead of an external color monitor. CTRL ALT F11 External color/graphic mode. Pressing this key combination tells the computer to use an external color monitor instead of the built-in LCD screen. Typewriter Keys: The main part of the keyboard, below the function keys, is similar to the keyboard of a standard typewriter. However, when you hold down a character or number key, the keystroke repeats automatically until you release the key. This section of the keyboard also contains some keys not found an a standard typewriter. ESC The function of the ESC key depends on the program you are running. CTRL You use the CTRL key in combination with certain other keys to perform specific operations. The combinations available and their functions are program-dependent. To use a CTRL key combination, hold down the CTRL key, and press the other key. For example, CTRL C performs a break or program interrupt in many programs. NOTE: Some software manuals refer to CTRL as CNTRL. ENTER The ENTER key enters commands and data into the computer. After you press ENTER, the command you entered is processed by the program or operating system you are running. NOTE: Some software manuals might refer to ENTER as RETURN or <ÄÄÄÙ. ALT You use the ALT key in combination with certain other keys to perform specific operations. The combinations available and their functions are program-dependent. To use an ALT key combination, hold down ALT, and press the other key. FN You use the FN in combination with cursor keys, INS, DEL, or ~ to perform the functions labeled in blue on your keyboard. INS The function of the INS key depends on the program you are running. In some programs, this key changes the typing mode from the normal overstrike (type- over) mode to the insertion mode so that you can insert data into a line of text. Pressing the key again returns the keyboard to the overstrike mode. FN INS Pressing the FN and INS key combination causes the alphabet keys to produce only capital letters. (This function affects only the keys A-Z.) The light on the upper part of the keyboard indicates when the keyboard is in the caps lock mode. Press this key combination once to activate the mode. Press the keys again to return to the normal typing mode. DEL The function of the DEL key depends on the program you are running. In some programs, this key erases the character at the current cursor position. FN DEL The FN and DEL key combination reverses the function of the numeric keypad at the right of the keyboard, activating a "number lock" mode. When this mode is active, the numeric keypad provides a calculator-like pad for entering numbers in application programs. It includes the numbers, operators (-,+,/,and *), and punctuation labeled in blue on the keyboard. The light on the upper part of the keyboard indicates when the keyboard is in "number lock" mode. Press the combination again to return to the normal key- board mode. SCROLL LOCK The function of the SCROLL LOCK key depends on the program you are running. Its use is defined in your operating system or application program manual. FN ~ Sends everything currently displayed on the screen to the printer. CTRL SCROLL LOCK The function of this key combination depends on the program you are running. In some programs, this combination causes a break, halting program execution. Numeric Keypad: The numeric keypad on the right side of the keyboard is arranged the same as a calculator keypad. Press the FN and DEL keys at the same time to use the keypad for extensive number entry. When number lock is on, the NUM LOCK indicator on the upper part of the keyboard lights. The values of the keys on the numeric keypad are 0-9, decimal (.), addition (+), subtraction (-), multiplication (*), and division (/) as printed in blue on the keyboard. Press the FN and DEL key combination again to return to the normal keyboard mode. Cursor Keys: The arrow keys at the lower right of the keyboard are cursor control keys. Pressing a cursor key moves the cursor one position in the direction of the arrow. Holding down a cursor key repeats the action. FN <-- Executes a "home" function. The function depends on the program you are running. In some programs, "Home" moves the cursor to the upper left corner of the screen. FN --> Executes an "end" function. The function depends on the program you are running. In some programs, "End" moves the cursor to the right of the last character in the current line. FN (Up Arrow) Executes a "page up" function. The function depends on the program you are running. FN (Down Arrow) Executes a "page down" function. The function depends on the program you are running. Control Key Combinations: CTRL ALT DEL Resets all system hardware and loads the system programs from the system diskette (if the system diskette is in Drive A or you installed MS-DOS on the hard disk of Tandy 1400 HD). CTRL ALT INS Changes the computer to Setup mode. (For detailed information about this mode, see the chapter entitled "Setup Mode.") In Setup mode, the display shows: Key Definitions: F1 : Set time for Standby Mode 0:10 F2 : LCD/CRT LCD CRT F3 : Internal/External Keyboard INT EXT F4 : COM1/COM2 Setup RS/MODEM MODEM/RS F5 : Direct Modem/Acoustic Coupler DIRECT ACOUS F6 : Internal/External Screen Controller INT EXT F7 : CPU Clock (MHz) 8.00 4.77 F8 : Date (MM-DD-YYYY) 02-17-1988 F9 : Time (HH:MM:SS) 18:28:30 Press ESC to Exit This display lets you decide on certain hardware options and indicate your choice to the 1400 LT. In Setup mode, the function keys perform as follows: F1 Lets you enter the time you want to elapse between the last time you use the computer and its automatic shut off. F2 Lets you choose between using the built-in display or an external monitor. F3 Lets you choose between using the built-in keyboard or an external one. F4 Lets you choose either COM port 1 or COM port 2 for an internal modem board and the RS-232C port. F5 If you are using an internal modem board, lets you choose between using a direct modem connection or an acoustic coupler connection. F6 Lets you choose between using the internal display controller or an external color monitor controller. F7 Lets you choose between an internal clock speed of 8.0 MHz or 4.77 MHz. F8 Lets you set the date of the real time clock. F9 Lets you set the time of the real time clock. Using an External Keyboard: The Tandy 1400 LT provides a connection port on the back of the system for an optional external keyboard. You can connect a Tandy Enhanced Keyboard (25-4032) or and IBM PC-compatible keyboard. If you wish, connect the external keyboard, and select EXT during Setup mode. Refer to Faxback Doc. #1924 on how to run the Setup for your computer. Be sure that you are familiar with the way the external keyboard works before you use it with the 1400 LT. NOTE: If you are using an enhanced keyboard, it must be set to IBM XT-compatible mode. The Tandy Enhanced Keyboard defaults to this mode.