4025 LX  (250-5125)             Installation            Faxback Doc. # 1639

Follow these steps to set up your computer for the first time:

1. Connect a monitor to the video adapter.
2. Connect the keyboard to the keyboard connector.
3. Connect all peripheral power and data cables as directed.

You can also connect an optional serial mouse and/or parallel printer.

4. Plug the power cord into a grounded AC outlet. Do not use an outlet that 
   powers heavy machinery, copiers, office machines, and so on. If you must 
   use an extension, use a grounded, multi-outlet power strip.

You can use the blade of a small screwdriver to set the voltage selector 
switch. Push the switch to the left for 115V power or to the right for 230V 
power, as illustrated:

The voltage selector switch is set to 115V at the factory.

CAUTION: Voltage requirements vary in different countries. Be sure to read the 
voltage label and set your system accordingly. If you switch the power 
supply's voltage from the original setting, be sure that you use the 
appropriate power cord.

For units set at 115V: Use a UL-listed cord set consisting of a minimum 18 
AWG, type SVT or SJT three-conductor cord a maximum of 15 feet in length and a 
parallel blade, grounding-type attachment plug rated 10A, 125V. -MORE-

For units set at 230V (inside U.S.): Use a UL-listed cord set consisting of a 
minimum 18 AWG, type SVT or SJT three-conductor cord a maximum of 15 feet in 
length and a tandem blade, grounding-type attachment plug rated 10A, 250V.

For units set at 230V (outside U.S.): Use a cord set consisting of a minimum 
18 AWG cord and grounding-type attachment plug rated 10A, 250V. The cord set 
should have the appropriate safety approvals for the country in which the 
equipment will be installed and should be marked HAR.