TANDY 2500 RSX (250-1620/1621) Video Modes Faxback Doc. # 1893 Mode Video Type Colors Resolution Columns Buffer Char. (Hex) Standard X Rows Size Hercules graphics mono 720 x 348 80 x 25 B0000 9 x 14 0,1 (1) CGA text 16 320 x 200 40 x 25 B8000 8 x 8 0,1 EGA text 16 320 x 350 40 x 25 B8000 8 x 14 0,1 VGA text 16 360 x 400 40 x 25 B8000 9 x 16 2,3 (1) CGA text 16 640 x 200 80 x 25 B8000 8 x 8 2,3 EGA text 16 640 x 350 80 x 25 B8000 8 x 14 2,3 (2) VGA graphics 16 720 x 400 80 x 25 B8000 9 x 16 4,5 (1) CGA graphics 4 320 x 200 40 x 25 B8000 8 x 8 61 MDA text 2 640 x 200 80 x 25 B8000 8 x 8 7 VGA text mono 720 x 350 80 x 25 B0000 9 x 14 7 (3) EGA graphics mono 720 x 400 80 x 25 B0000 9 x 16 D (1) EGA graphics 16 320 x 200 40 x 25 A0000 8 x 8 E (1) EGA graphics 16 640 x 200 80 x 25 A0000 8 x 8 F EGA graphics mono 640 x 350 80 x 25 A0000 8 x 14 10 VGA graphics 16 640 x 350 80 x 25 A0000 8 x 14 11 VGA graphics 2 640 x 480 80 x 30 A0000 8 x 16 12 VGA graphics 16 640 x 480 80 x 30 A0000 8 x 16 13 (1) graphics 256 320 x 200 40 x 25 A0000 8 x 8 (1) All 200-line modes are double-scanned to display 400 lines. (2) Default mode for color monitors. (3) Default mode for monochrome monitors. Super VGA Modes: Mode Resolution Columns Colors Memory Vsync Vsync & Type X Rows Default Options(2) 54,T 1056 x 387 132 x 43 16/256K 256KB 70Hz 60,70Hz 55,T 1056 x 400 132 x 25 16/256K 256KB 70Hz 60,70Hz 56,T,M 1056 x 387 132 x 43 4/256K 256KB 70Hz 57,T,M 1056 x 400 132 x 25 4/256K 256KB 70Hz 58,G 800 x 600 100 x 37 16/256K 256KB 56Hz 60,70Hz 5C,G (3) 800 x 600 100 x 75 256K/256K 512KB 56Hz 60,70Hz 5D,G (3) 1024 x 768 128 x 48 16K/256K 512KB 43Hz (4) 60,70Hz 5F,G (3) 640 x 480 80 x 60 256K/256K 512KB 60Hz 72Hz (1) The mode types are Text (T), Monochrome (M), and Graphics (G). (2) The optional VSYNC frequencies can be obtained using ACU.EXE, AVGA2CFG.COM, and SETMODE.EXE on the Utilities diskette. (3) Use the Video Memory Upgrade Kit for 512KB of video RAM. (4) Interlaced. Video Troubleshooting: This section lists typical symptoms of video problems, along with their solutions: Blank Screen: * Check that all system power switches are on. * Adjust monitor's brightness or contrast control knob. * Check all the cable connections. F1 Setup Error when you start the System: * Check the configuration of your software to ensure that it is set for a mode that is compatible with the video mode you selected with SETMODE. * Run SETMODE to select a video mode supported by the software you are using.