1500 HD  (250-3506)      Initializing the Hard Drive    Faxback Doc. # 1908

The hard disk in the 1500 HD is pre-formatted, and you should not need to 
use this procedure in most cases. But, if you want to reformat the hard disk 
for a different version of DOS, add partitions, or reformat for any other 
reason, use the following procedure.

CAUTION: Formatting the hard disk erases all information on the drive.

The initialization process has three steps. To perform the three steps, use
the following three commands found on the MS-DOS/DeskMate diskette:

1. Run HSECT to low-level format the drive.

2. Run FDISK to partition the drive.

3. Run FORMAT to high-level format the drive.

(jej-05/10/94)