EGA/CGA Graphics Adapter (250-3048A)  Installation     Faxback Doc. # 2115

1.  Remove the computer's cover and disconnect all peripheral cables as
    directed by the owner's manual for your computer.

2.  Install the Tandy EGA/CGA Adapter by firmly pressing the adapter into
    the selected expansion slot.

3.  If you have a light pen, connect it to connector P2, according to the
    manufacturer's instructions.

3.  Replace the computer's cover.

4.  Connect all peripheral cables.

5.  For Tandy 3000/4000 computers, run the SETUP program. Refer to you CPU
    manual for instructions on how to do this.


(smm/jej-05/11/94)