SVGA Windows Accel. Adpater (250-4055)   Drivers       Faxback Doc. # 2175

OS/2 Versions 1.2 and 1.3 Drivers:

OS/2 drivers are provided for Version 1.2 and 1.3 Presentation Manager.

Installing OS/2 Drivers:

The first time you use the OS/2 display drivers and each time you change the
video adapter or DIP switch settings, perform the following steps to ensure
that OS/2 uses a video mode that is compatible with your video adapter and
monitor:

1. Make sure the OS/2 Drivers Diskette is not write protected. Then, restart
   your computer with this diskette in Drive A. Follow the instructions on
   the screen.

   The software records the parameters for your video adapter and monitor
   selections in the MTABLE.WDC file on the diskette.

2. If OS/2 is not already installed, install it with standard VGA driver
   packaged with OS/2.
3. Restart your computer with the OS/2 Installation Diskette in the diskette
   driver. When the first OS/2 screen is displayed, press ESC to enter the
   OS/2 command interpreter.
4. Change to the \OS2\INSTALL directory on Drive C.
5. Run DDINSTAL, and follow the directions on the screen.

(jej-05/11/94)