Multimedia Board (250-1090)       Loading the CD        Faxback Doc. # 2440

A compact disc can store up to 630MB of data. The disc is accessed like a 
diskette or a hard disk; however, the disc is read only, so you cannot save 
data to it.

Below are instruction for loading a CD disc into the drive tray:

1. Turn on the computer.

2. Open an internal CD-ROM drive by gently pressing the drive faceplate. For
   external CD-ROM drives, press the Open button. The drive unlatches from
   its locked position and springs out partially from the bay.

3. Pull the drive out until it is fully extended.

4. Raise the disc cover, and insert the Multimedia PC System Disc with the
   label side facing up.

NOTE: Insert the disc into the CD-ROM drive before starting your Windows
      session.

CAUTION: To remove a CD from its case, press down on the button tabs that
         hold the center of the CD and gently lift the CD out by its edges.
         To avoid scratching or smudging the CD, never touch the top or
         bottom flat surfaces of the CD.

5. Lower the disc cover.

6. Slide the drive back into the bay until it latches back into place.

(rjs-06/01/93)