MMPC Model 10/20  (250-1640/41)     Video Drivers      Faxback Doc. # 2531

Installing the Video Drivers

Use the instructions in this section to install the application-specific
drivers provided with the computer.

Installing the MS-DOS Video Drivers

Use this procedure to copy the video drivers from the System Disc.  You
will need a 3 1/2-inch, high-capacity diskette to copy the video drivers.
It is not necessary to format the diskette.

1.  Insert the System Disc into the CD-ROM drive.

2.  At the MS-DOS prompt, type "d:" and press ENTER to
    access the drive.

3.  Type "cd\svgadrvr" and press ENTER.

4.  Insert the diskette into the diskette drive.

5.  Type "makedos" and press ENTER.  MAKEDOS formats and
    copies the driver files from the System Disc to your
    diskette.

6.  Type "a:" and press to access the diskette.

7.  Type "install" and press ENTER.  Follow the instructions
    on the screen to install the MS-DOS video drivers.

Installing the Window Video Drivers

Before installing the Windows drivers, check the video driver that your
system is using.  You cannot install the Windows drivers if you are
running an earlier version of a Windows drivers you are about to install.
If an error message is displayed during the following procedure, use
Windows SETUP to change to the standard Windows VGA driver.

1.  From the Program Manager, select the File menu.  Then,
    select "Run."

2.  Insert the system disk into the CD-ROM drive.

3.  At the prompt, type "d: \svgadrvr\disk2\install" 
    and press ENTER.  Follow the instructions on the screen
    to install the Windows video drivers.

    After installing the Windows video drivers, you may want
    to use the SETRES utility to adjust the resolution of
    the video mode you use with Windows.  Refer to "Using
    the SETRES Utility."

Installing the 1MB Video Driver

If you upgrade the video memory from 512KB to 1MB memory after you
install the Windows video drivers, you will need to install the 1MB
video drivers for Windows.  Insert the System Disc into the CD-ROM
drive.  At the MS-DOS prompt, type:

 "copy d: \svgadrvr\disk2\system\256_1280.drv c: \windows\
 system"

and press ENTER to install the 1MB driver on your hard drive.


(smc-02/02/94)