SENSATION!  (250-1650)      Installing Software        Faxback Doc. # 2629

Upgrading The Hard Drive And Installing The Software

Once a new hard drive or the existing hard drive is installed into the 
Sensation, here are the steps to reinstall the software from the beginning, 
do the following.

1.   Place the start-up floppy disk in drive A: and boot the computer.
     The start-up floppy disk is supplied with the Sensation.

2.   At the A:> type FORMAT C:/S   <enter>
      Formatting the hard drive with the /S option, makes it bootable.

3.   Place the SYSTEM CD in the CD-ROM drive.
     At the A:> type SETUPDOS <enter>.  Follow all prompts.

4.   Remove start-up floppy disk from drive A: and re-boot computer.

5.   At C:\>, remove SYSTEM CD from CD-ROM drive. Place DATA CD in the 
     CD-ROM drive.

6.   Type D: <enter> to get a D:\> prompt.

7.   From the D:\> prompt, type INSTALL <enter>.

8.   Type 1 and press <enter>.

You will see a message saying that the installation takes about 30 minutes.

9.   When installation is complete, re-boot computer.

The computer should boot to the WinMate screen.