CDR-1000 (250-1077) CD Audio with the Sound Blaster Pro Faxback Doc. # 2718

If you have a CDR-1000 and a Soundblaster Pro Board in your TANDY Computer
and are not able to hear CD audio, you may have the 4 pin Audio Cable from
the rear of the CD-ROM plugged directly into the Soundblaster Pro's AUDIO
IN Jack.  This will not work.  The 4 pin cable from the CDR-1000 must be
connected to it's own interface board Audio Connector.  Then cable, (Catalog
# 42-2475) must be run externally from the RCA jacks on the CD interface
board to the LINE IN jacks on the Soundblaster Pro board.

(jlc-11/17/93)