SENSATION! (250-1650)             Addendum              Faxback Doc. # 2841

Changes/Additions to Winmate:

Note: The following changes/additions to the WinMate applications:

Banners:

If the banner you are printing is over nine pages, then the maximum number
of pages you can print must be determined for the printer you're using.  It
is a good idea to figure the number of pixels per page that you are printing.

To determine the maximum number of pages you can print on your printer:

1. Multiply the number of pixels per inch of the print resolution (found in
   the Print Quality: field of the Print dialog box) by the number of
   horizontal inches of paper (11" if you are printing in landscape format
   on an 8 1/2 by 11" sheet of paper).
2. Divide the total from Step 1 into 32,000. (For example, 300 dpi and 11"
   equals 3300. Dividing that into 32,000 gives you 9 pages for the length
   of your banner.

The result is the maximum number of pages you can print.

Graphics Manager:

The following WinMate picture files are furnished courtesy of the following
people: (The original tiles are listed in parentheses.)

Ken Adams                Julie Wolfe            Patty Gray

roadl.bmp(Autumn Road)   lake2.bmp(Lake 1)      sunset3.bmp(Sunset 3)
                         lake3.bmp(Lake 2)      girl1.bmp(Sunset 5)
                                                build1.bmp(Tree)
                                                falls3.bmp(Water Falls 2)

Corina Martin

blhole.bmp(Blow Hole)       flower3.bmp(Flower 2)    pbear22.bmp(Polar Bear)
bfly2.bmp(Butterfly)        passion1.bmp(Flower 3)   pdog2.bmp(Prairie Dog)
build2.bmp(Capitol Bldg.)   fount2.bmp(Fountain)     mgoat22.bmp(Ram)
kitty2.bmp(Cat Eyes)        gorilla2.bmp(Gorilla)    seal2.bmp(Seal)
chimp1.bmp(Chimp)           hut2.bmp(Grass Hut)      snow122.bmp(Snow Owl)
city13.bmp(City)            llama2.bmp(Llama)        squir3.bmp(Squirrel)
cormor2.bmp(Cormorant)      church2.bmp(Old Church)  sunset22.bmp(Sunset 2)
crcrane.cmp(Crowned Crane)  parrot22.bmp(Pelican)    tiger2.bmp(Tiger)
flam1.bmp(Flamingos)        pelican.bmp(Pelican)     Woodck2.bmp(Woodchuck)
flower2.bmp(Flower 1)       penguin.bmp(Penguin)

Roger Hein                         Lori Lind

flags.bmp(Flags)                   cabins2.bmp(Ghost Town)
baloons.bmp(Hot Air Balloons)      village2.bmp(Mesa Verde)
kimbell.bmp(Kimbell Museum)        mount1.bmp(Mountain 1)
sunrise.bmp(Sunset 1)              mount3.bmp(Mountain 2)
sunset.bmp(Sunset 4)               mount4.bmp(Mountain 3)
tugboat.bmp(Tug Boat)              train1.bmp(Train)
falls0.bmp(Water Falls 1)          chipmk2.bmp(Chipmunk)

Phoenix Microfax:

This software program is pre-installed on our Sensation computer. You can
run this software to use your Sensation computer as a fax machine.

The Phoenix MicroFAX program can be accessed through WinMate's In Touch
category. The three Phoenix MicroFAX icons are described below:

Phoenix MicroFAX--Choose this icon to view, edit, and send your faxes.

Phoenix Comserver--Loads automatically when you choose to send a fax so that
the information is converted to the fax file format and the number you are
calling is dialed.

Phoenix Queue--Choose this icon to view a list of the faxes waiting to be
sent.

Phone Book Reader:

If you are having trouble dialing out in the Phone Book Reader application,
be sure the Windows Terminal application or other communications software is
closed.

Phone Center:

* When you select the Announce command on the Options Menu, you need to be
  sure to record an announcement. If you do not record a message, the Sound
  Recorder records an empty sound, and the currently recorded announcement
  is overwritten when you exit the Sound Recorder.
* When you are using the Sound Recorder and you minimize it (instead of
  closing it), the Phone Center application will not respond to any mouse or
  keyboard operations. To regain use of Phone Center, reopen the Sound
  Recorder and close it.

Note: To reopen the Sound Recorder, click on the Pause icon and choose the
Sound Recorder.

Profiler:

In the Add Information Area dialog box, you must use the mouse to click on
the Add Area or Done button.

Prosonus Music Files:

These music and sound effects files are located on the Data Disc in Drive D.
There are 50 sound effects files located in the d:\soundefx directory. There
are 20 musical tunes located in the d:\tunes directory. These tunes include
wave and midi files in lengths of 5, 15, 30, and 60 seconds.

Travel Planner:

To print addresses for each destination, switch to the destination you want
to print. Then use the Trip Menu's Print command to print the address
information for the current destination. Repeat these steps for each
destination you want to print addresses for.

Tutorials:

You must use the mouse to move around the screen when running the WinMate
Tutorials.

General Information:

Please note the following general information.

Change the Default Desktop:

WinMate's desktop automatically appears when you start your computer. If you
prefer to go directly into Windows Program Manager, follow these steps:

1. Double Click on the desktop's Inside category, and then double click on
   the Notepad icon.
2. Use the Notepad File Menu's Open command to open the system.ini file in
   c:\windows.
3. Change the line shell=desktop.exe to: shell=progman.exe
4. Save and exit the system.ini file.

When you restart your computer, Windows Program Manager will automatically
appear.

Copy a Works Template:

You should not make a copy of any of the Works templates currently stored in
c:\winmate\template.

However, you might occasionally want a new copy of a specific template (for
example, to set up a budget for each month of the year).

To make additional copies of a template:

1. Rename the appropriate template currently stored in your
   c:\winmate\template directory.
2. Insert the Data Disc CD into the CD player.
3. Choose the Desktop's Inside category.
4. Double click on System Tools.
5. Double click on the File Manager icon.
6. In File Manager, select Drive D and go to the following directory:
   d:\original\winmate\template
7. Find the template file you want to copy and copy it to: c:\winmate\template
8. Select Drive C and highlight the file you just copied.
9. Use the File Menu's Properties command to turn off the Read Only
   attribute.

You can now use this new template file.

Copy an Original File:

If you ever need to restore a file, use the Data Disc CD and locate the
appropriate file in the \original directory.

You'll want to copy the file to the same directory on your C: drive. For
example, if you want to copy the annivsy1.ban file, you would find it on the
Data Disc CD in the \original\winmate\pictures\banners directory. You would
then copy the file to c:\winmate\pictures\banners.

Use the steps described in the "Copy a Works Template" topic in this section
of the addendum to copy the file.

Software Installation Information:

Reinstalling Your Sensation Computer's Software from the Desktop:

The "Solving Problems" section of the computer's user's guide explains how
to install and remove applications. If both Windows and WinMate are
installed, you can reinstall or remove software from the WinMate desktop as
follows:

1. Insert the Data Disc into the CD-ROM drive.
2. From the WinMate desktop, select the Inside category.
3. Double click on System Tools. Then, double click on the Sensation Install
   icon. A menu of applications is displayed.
4. Select the applications you want to install onto the hard drive from the
   Data Disc, or select the applications you want to remove from the hard
   drive.

Installing a New Windows Application:

Some Windows software requires that you use Program Manager when installing
the program. If you try to install using the WinMate desktop's Install
command on the File Menu and the software does not install correctly, access
Windows Program Manager. You can access the Program Manager using the Run
Program Manager icon on the desktop. Use Program Manager to install the
software. (See the software program's documentation for instructions).

If after installing the software you want to access it from WinMate, see
the WinMate manual's Desktop chapter for instructions on adding an
application to the desktop.

Reinstalling Microsoft Money:

Your Microsoft Money software is pre-installed on your Sensation computer.
If you need to reinstall the MicroSoft Money software, follow the
instructions in the "Installing Software from the WinMate Desktop" topic.
Use these instructions instead of the instructions on page 4 in the
Microsoft Works documentation.

Reinstalling Phoenix MicroFAX:

Your Phoenix MicroFAX software is pre-installed on your Sensation computer.
If you need to reinstall the Phoenix MicroFAX software, follow the
instructions in the "Installing Software from the WinMate Desktop" topic in
this section of the addendum. Use these instructions instead of the
instructions on page 2 in the Phoenix MicroFAX documentation.

Setting Up the Sierra Network:

The first time you choose The Sierra Network icon from the desktop's In Play
category, the Sierra Network install program runs so that you can enter the
phone number Host ID number. After you enter this number, the following
prompt appears:

         Your system does not appear to support this choice:
         Communications Port 2 (COM2)
         Do you wish to install it anyway? Y/N

Choose Y to complete the installation procedure.

Internal Options:

Installing Additional Video Memory:

Before installing additional video memory, remove the computer cover and the
expansion adapter cover as described in your computer user's guide. It is
not necessary to remove the drive tray to install additional video memory.

Jumper Settings:

Refer to the following settings before setting the J16 jumper on the main
logic board:

JUMPER        SETTING             FUNCTION
J16           Installed (2)       Color video enabled
              Parked (1)          Monochrome video enabled

(1) Default jumper setting for a monochrome display adapter and monitor.
(2) Install to connect a CGA adapter and monitor.

For additional information about using video adapter/monitor combinations,
contact your computer dealer.

Enabling the Sound Blaster Emulator Audio Driver for MS-DOS Applications

Some MS-DOS-based computer games are designed to used the Sound Blaster
audio capabilities. To enable the Sound Blaster emulation, you must install
the Sound Blaster emulator audio driver:

1. From the Windows desktop, click on the Main group.
2. Double click on the Control Panel icon, and then double click on the
   Drivers icon.
3. Click on the Add button. A list of drivers is displayed.
4. Select Tandy Virtual DSP Driver, click OK. The following prompt is
   displayed:

    The required driver is already on the system. Do you want to use the
    current driver or install a new driver?

5. Click on Current.
6. Select Close to return to the Windows Desktop.
7. Exit Windows. Restart Windows to initialize the driver.

The emulator audio driver installation is complete. MS-DOS-based software
designed to use Sound Blaster audio runs with enhanced audio.

To run MS-DOS-based applications, double click on the MS-DOS icon in the
Main Group on the Windows desktop. Then, run the application from the MS-DOS
prompt.

To disable the emulator audio driver, repeat Steps 1 and 2 and then select
Remove.