Record Cleaner (420-2501) Faxback Doc. # 2990 TECH SPRAY, INC. MATERIAL SAFETY DATA SHEET P O BOX 949 RS 42-2501 88 NORTH HUGHES AMARILLO TX 79105 (806) 372-8523 Professional Anti-Static Record Cleaner Spray Hazardous Description: (For Shipping Purposes Only) Compressed Gas N.O.S. Non-Flammable Gas UN1956 Hazard Rating Health: 2 Fire: 2 Reactivity: 1 0-Least 1-Slight 2-Moderate 3-High 4-Extreme * * * * * * * I--HAZARDOUS COMPONENTS * * * * * * * ------------------------------------------------------------------------- Ingredients | CAS No. | % | Hazard ------------------------------------------------------------------------- | | | Dichlorofluoroethane (141b) | 1717-00-6 | 52 | See Section IX. | | | Silicone fluid | 63148-62-9 | <1 | | | | | | | Ethanol (Ethyl Alcohol) | 64-17-5 | 28 | OSHA PEL 1000ppm | | | ACGIH TLV 1000ppm | | | | | | PROPELLANT | | | Carbon dioxide | 124-38-9 | 2 | OSHA PEL 10,000ppm Chlorodifluoromethane | 75-45-6 | 18 | OSHA PEL 1000ppm | | | ACGIH TLV 1000ppm | | | LD50 220,000ppm/rat * * * * * * * II--PHYSICAL DATA * * * * * * * ------------------------------------------------------------------------- Boiling Point .......... 35øC / F pH ........................ NA Density ................ 1.04 % Volatile ................ 100 Solubility in Water .... NE % Solids .................. 0 Vapor Density (Air=1) .. 4.0 Evaporation Rate (H2O=1) .. >1 Appearance: Clear water--white mobile liquid with slight ethereal odor. * * * * * * * III--FIRE AND EXPLOSION HAZARD DATA * * * * * * * ------------------------------------------------------------------------- Flash Point: None to boiling. See IX. Explosion Limits LEL: NE UEL: NE Extinguishing Media: Water, foam, dry chemical, carbon dioxide. Special Firefighting Procedures: Firefighters should wear self-contained, positive-pressure breathing apparatus and avoid contact with fumes which could contain hydochloric and hydrofluoric acid. Unusual Fire and Explosion Hazards: Aerosol cans may erupt with force at temperatures above 120øF. Page 1 of 3 TECH SPRAY, INC. MATERIAL SAFETY DATA SHEET P O BOX 949 RS 42-2501 88 NORTH HUGHES AMARILLO TX 79105 (806) 372-8523 * * * * * * * IV--HEALTH HAZARD DATA * * * * * * * ------------------------------------------------------------------------- Effects of Overexposure INHALATION: Major route of exposure. Vapor is heavier than air and can cause suffocation by reducing the available oxygen for breathing. Inhaling high concentrations of vapor could cause light-headedness, giddiness, shortness of breath, and/or confusion, and may lead to narcosis, cardiac irregularities, unconsciousness or even death. EYES: Liquid contact will irritate eyes and may cause conjunctivitis. SKIN: Not a corrosive or and irritant; however, repeated or prolonged exposure can cause defatting of skin. INGESTION: Single-dose toxicity is low to moderate. If vomiting does occur, the liquid can be aspirated into the lungs, which can cause chemical pneumonia and systemic effects. Human psychotropic, gastrointestinal, and central nervous system effects are possible. ------------------------------------------------------------------------- Emergency and First Aid Procedures INHALATION: Remove to fresh air. If breathing has stopped, administer artificial respiration. Seek medical attention. EYES: Flush eyes with water for 15 minutes. Lift eyelids occasionally until no evidence of chemical is present. Call physician. SKIN: Wash promptly with soap and water for 15 minutes while removing contaminated clothing. Get medical attention immediately. Wash clothing before reuse. INGESTION: If conscious, give 2-4 glasses of water and induce vomiting or remove chemical by gastric lavage. Seek medical attention immediately. Never give anything by mouth to an unconscious person. NOTE: Do NOT treat victim with adrenalin. Overexposure, especially if accompanied by anoxia, may cause cardiac irritability and cause respiratory distress. Maintain oxygenation until recovery. COMMENTS: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage (sometimes called painters' syndrome). Intentional misuse by concentrating and inhaling this product may be harmful or fatal. * * * * * * * V--REACTIVITY DATA * * * * * * * ------------------------------------------------------------------------- Stability: STABLE Conditions to Avoid: Contact with open flame, heat. Incompatibility (materials to avoid): Reactive alkali metals, strong acids & bases. Hazardous Decomposition Products: Hydrogen chloride, phosgene, chlorine, carbon dioxide, and carbon monoxide. Hazardous Polymerization: WILL NOT OCCUR Conditions to Avoid: None Page 2 of 3 TECH SPRAY, INC. MATERIAL SAFETY DATA SHEET P O BOX 949 RS 42-2501 88 NORTH HUGHES AMARILLO TX 79105 (806) 372-8523 * * * * * * * VI--SPILL OR LEAK PROCEDURES * * * * * * * ------------------------------------------------------------------------- Evacuate area. Ventilate area well and avoid breathing vapors. Vapor concentration will be highest along the floor and in low lying areas. Pick up liquid on a suitable absorbant and store in sealed containers. Shut off fire sources. Workers should wear proper equipment when working in a clean up area. * * * * * * * VII--WASTE DISPOSAL METHODS * * * * * * * ------------------------------------------------------------------------- Material may be disposed of by a licensed reclaimer or incineration facility. Consult local, state, and federal disposal authorities for approved procedures. * * * * * * * VIII--EMPLOYEE PROTECTION * * * * * * * ------------------------------------------------------------------------- Respiratory Protection: Use NIOSH-approved organic vapor mask when vapor levels exceed TLV. Ventilation: Do not use in closed space. Ventilation required. Hands: Solvent-resistant gloves such as Neoprene or PVA. Eyes: Wear splash-proof safety goggles or glasses. Special Precautions: This product is intended for industral use only. * * * * * * * * IX--OTHER INFORMATION * * * * * * * ------------------------------------------------------------------------- Note: Toxicity studies have not been completed on chlorodifluoroethane (141b). Therefore, a TLV cannot be assigned. A working TLV of 350ppm has been adopted until the test are finished. Flash point data: The material exhibited a flash after approximately 10% of the volume had evaporated. ------------------------------------------------------------------------- Prepared By: J. Witcher Date: 07-11-91 NL=Not Listed NIF=No Information Found NE=Not Established NA=Not Applicable Page 3 of 3