Quick Link II Fax  (250-3027B)     Mouse and Modem     Faxback Doc. # 3214

Special mouse and modem considerations

Your modem connects to your computer via a COM port (COM1 through COM4;
your serial ports) - so does your mouse if you have what is called a
"serial mouse".  Your modem and mouse cannot use the same COM port.  Also,
if your fax/modem is on COM1 or COM3, the mouse can only use COM2 or COM4.
If the fax/modem is on COM2 or COM4, then the mouse can only use COM1 or
COM3.  If you do not follow this very important rule, your mouse or modem
will not work.

Additionally, in order for your mouse to function in the DOS environment,
you must have the mouse's DOS driver installed in either your CONFIG.SYS
or AUTOEXEC.BAT file, depending on the brand of mouse you have.  These
drivers should have been included with your mouse and might have been
already installed by your dealer.  If your mouse works in Windows, but not
in DOS or Quick Link II Fax, consult the documentation that came with your
mouse or contact your dealer.

(br/all-10/10/94)