JP 1000  (260-2960)        Windows 3.1 Driver          Faxback Doc. # 3321

MODIFYING THE PARAMETERS IN THE WINDOWS 3.1 DRIVER

    Open Windows.

    In PROGRAM MANAGER, activate the MAIN menu and then CONTROL PANEL,
    clicking twice with your mouse indicator on the corresponding icons.

    From CONTROL PANEL menu, activate the PRINTERS dialogue box, in the
    same way.

    To alter the default parameters, click once on SETUP; the following
    parameters are proposed and can be altered, if necessary:

        - Resolution           selection of graphic densities

        - Paper size           A4, US letter, etc.

        - Paper source         ASF, manual

        - Memory               from none to various optional values

        - Paper Orientation    Portrait or Landscape

        - Cartridges           various optional memory cards

    If you click on OPTIONS... in the SETUP dialogue box, a further series
    of parameters is displayed:

        - Paper Quality        plain paper, film, etc.

        - Print Quality        LQ or Draft

        - Dithering            defines the way colors are mixed

        - Intensity Control    increases/decreases the darkness of the
                               graphics

N.B. The items "Dithering" and "Intensity Control" in the OPTIONS dialogue
box are effective only when you print files which have been created in
color in black and white.

To close the dialogue boxes, click once on OK in the corresponding
dialogue box, if you have changed any value(s) and wish to confirm it/them
or on CANCEL to exit without saving any changes.

    If your printer is connected to the serial port on your PC with a
    serial interface cable (option), click on the CONNECT in the PRINTERS
    dialogue box.

    - Choose the port you intend to use from the Ports: box (usually 
      COM1).

    - Click once on SETTINGS... to check that the transmission parameters
      are correct for the type of serial transmission you intend to use
      (if necessary, alter them).

    - Click once on OK to close each dialogue box you open.

    Click once on CLOSE to close the PRINTERS dialogue box.

NOTE:  You cannot print the printer's resident landscape fonts (Courier
       and Letter Gothic) in Windows landscape environment.  To print in
       landscape, you must use the Windows screen fonts (Truetype, bitmap)
       or programs such as FaceLift (Bitstream).

(ALL-11/17/94)