Model 800 (160-0654) Care and Maintenance Faxback Doc. # 3607 Your Model 800 8mm Hi-Fi Stereo VCR is an example of superior design and craftsmanship. The following suggestions will help you care for the VCR so that you can enjoy it for years. Keep the VCR dry. If it does get wet, wipe it dry immediately. Liquids can contain minerals that corrode the electronic circuits. For your VCR's remote control, use only fresh batteries of the recommended size and type. Always remove old or weak batteries. They can leak chemicals that can damage electronic circuits. Handle the VCR gently and carefully. Dropping it can damage its circuit boards and case and can cause it to work improperly. Use and store the VCR only in normal temperature environments. Temperature extremes can shorten the life of electronic devices, and distort or melt plastic parts. Keep the VCR away from dust and dirt, which can cause premature wear of parts. Wipe the VCR with a damp cloth occasionally to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the VCR. Do not spray cleaners or insecticides near the VCR. Such chemicals might damage and discolor the exposed surfaces. Your VCR has ventilation holes to allow heat to dissipate properly. Obstructing these holes or placing your VCR in a confined location can prevent proper ventilation and cause malfunctions or occur. HEAD CLEANING Dirty video heads cause the playback picture to blur, even if the recorded signal is clear. However, video head cleaning is a delicate operation, requiring a trained technician. For more head cleaning information, go to your local Radio Shack store. Clean the heads only when picture quality if affected. SERVICING Modifying or tampering with your VCR's internal components can cause a malfunction and might invalidate the VCR's warranty and void your FCC authorization to operate it. If your VCR is not operating as it should, take it to your local Radio Shack store. Our personnel can assist you and arrange for service if needed. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose authority to operate this equipment if an unauthorized change or modification is made. (ALL-12/13/94)