DMP-137  (260-2887)          Setting Margins           Faxback Doc. # 4011

You can set printer's left and right margins using the front panel keypad.
You can still change the margins through the software after setting the
margin by this method.

Note: The front panel method for setting the margins does not affect the
character pitch setting.

Follow these steps to set the margins using the keypad.

1. Be sure paper is loaded and the printer is on line (the ON/OFF LINE
   indicator is on).

2. Press and hold ON/OFF LINE until the ON/OFF LINE indicator flashes.

3. The printer cover has a label for MARGIN. Press ---> to move the print
   head until it is next to the MARGIN label.

4. Press SET to enter the margin-set mode. The print head moves to the
   current left-margin position.

5. Press <--- or ---> to move the print head to the position you want to
   set as the left margin.

6. Press SET to the left margin. The print head moves to the current
   right-margin position.

7. Press <--- or ---> to move the print head to the position you want to
   set as the right margin.

8. Press SET to set the right margin. The printer goes back on line.

Note: If the left margin is set beyond the current right-margin position or
if the space between the margins is less than 2/5", the PAPER OUT indicator
flashes three times. Repeat Steps 1-8 to reset the margins.

(dtc-08/06/93)