DMP-137  (260-2887)       Using The HEXDUMP Feature    Faxback Doc. # 4012

This feature lets you print the hexidecimal information the computer sends
to the printer. You can use this feature as a diagnostic tool when you have
problems with the computer or the software.

Follow these steps to use the hex dump feature.

1. Load 8.5" wide paper.

CAUTION: The hex dump prints lines that are 8 inches long, so you must use
8.5" wide paper to protect the platen.

2. While you hold down ON/OFF LINE, set the POWER switch to ON. When the
   ON/OFF LINE indicator lights, release the ON/OFF LINE.

3. Send the print command from your computer.

4. Set POWER to OFF to end the hex dump mode.

(dtc-08/06/93)