DMP-136  (260-2868)            Specifications          Faxback Doc. # 4023

         Interface: Centronics Parallel (IBM Port)
   Printing Method: Impact dot matrix, with a 9-wire print head
    Printing Speed: Draft characters: 10 CPI: 160 CPS
                    High-Speed 10 CPI: 213 CPS
                    Near Letter Quality (NLQ): 10 CPI: 40 CPS
Character Sets
CPI = Characters Per Inch; CPS = Characters Per Second;  DPI = Dots Per Inch

   Epson Emulation: 96, regular, 96 italic, 32 international 
                    for each of 13 languages, 32 graphic 
                    characters and special symbols
     IBM Emulation: 96 regular, 160 graphic characters and 
                    special symbols, code page selectable
             Fonts: Letter Quality Roman
                    Letter Quality Sans Serif
                    Letter Quality Courier
                    Draft
                    High-Speed Draft
  Character Matrix: CPI     Draft     NLQ
  (Horiz. x Vert.): 10      9 x 9     18 x 18
                    HS-12   7 x 9
   Bit Image Modes: 60, 72, 80, 90, 120, 144, and 240 (Horizontal) DPI
      Column Width: CPI      Column Width
                    10       80
                    12       96
                    15       120
                    17.1     137
      Line Spacing: 1/6, 1/8, 7/72 standard
                    n/72, n/144, or n/240 inch programmable
Ribbon
    Standard Black: (260-2824) Continuous nylon in disposable cassette
                    Ribbon life: approximately 2 million draft characters
    Optional Color: (260-2826) 4-color ribbon (yellow, magenta, cyan, and
                    black) in disposable cassette
Paper
  Continuous Forms: Width: 4-10 inches
                    Weight: 14-27 lbs. (single-part)
                    Thickness: Up to 4 parts including original, maximum form
                    thickness 0.22mm (4-part forms should use bottom paper-feed
                    method)
     Single Sheets: Width: 7.2-10 inches
                    Weight: 14-27 lbs.
           Feeding: Push tractor (for rear feed and paper parking)
                    Single-sheet loading
                    Pull tractor (for bottom feed and rear feed without 
                    paper parking)
        Dimensions: Height: 5.1 inches (130mm)
                    Width: 16.9 inches (430mm)
                    Length: 12.6 inches (320mm)
            Weight: 11 lbs. (5kg)
Power Requirements: 120 VAC, 60 Hz (US)
 Power Consumption: At standby: 10 W
                    During printing of ASCII 96 sliding pattern: 32 W
Temperature
         Operating: 55 to 85'F (13 to 30'C)
           Storage: -40 to 150'F (-40 to 66'C)
Relative Humidity
         Operating: 20 to 80%
           Storage: 10 to 90%
      Printer MTBF: 4,000 hours
 Printer Head Life: 200 million strokes per wire

(dtc-08/06/93)