DMP-136  (260-2868)             Using Autotear         Faxback Doc. # 4034

Advancing Paper to the Tear-Off Position:

The perforation tear-off feature allows the printer to automatically advance
the paper to the tear-off position when you finish printing. When the 
printer receives the next print data, it automatically retracts the paper to
the TOF position and begins printing. However, you can also manually advance
the paper to the tear-off position by doing the following:

NOTE: The tractor must be in the push-tractor mode.

1. Set the printer off line.

2. With the paper in the TOF position, press and hold down LF/FF for about 
   two seconds to advance the paper to the tear-off position.

NOTE: You can not advance the paper to the tear-off position from the 
      parked position.

3. Set the printer back on line.

NOTES:

* If the paper does not advance to the perforation, be sure the length of 
  the paper matches the form length DIP switch setting.

* If the paper is at the tear-off position when you begin printing, the 
  paper is automatically moved down to the next TOF position.

(dtc-08/06/93)