DMP 2130  (260-2845)           Headgap Setting         Faxback Doc. # 4210

Adjusting the Printer Head Gap:

Use the print head positioning lever to adjust the gap between the print
head and the platen to achieve the best print quality.

Move the lever up to increase the gap; move it down to decrease the gap.

Before printing, select a suitable position for the print head positioning
lever from the suggested values shown in the table below:

 1 sheet of paper                 Position 1
 2 sheets of paper                Position 2 or 3
 3 sheets of paper                Position 3 or 4
 4 sheets of paper                Position 4 or 5
 5 sheets of paper                Position 5

 Envelopes or other papers that exceed 0.35mm in thickness: Position 6 or 7

(dtc-07/26/93)