DMP 100  (260-1253)           Ribbons                  Faxback Doc. # 4270

Fabric Ribbon  (260-1424)

RIBBON CASSETTE INSTALLATION

1. Locate the ribbon cassettes which are packed in the carton separately 
   from the Printer.

2. Place the ribbon cassettes so the protrusions are facing the front side 
   of the Printer.

3. Remove the printer cover.

4. Place the ribbon cassettes in the positions (1), (2), and (3).

NOTES:

1. Check that the ribbon is not twisted.
2. You can not install the ribbon cassettes if the left and right cassettes
   are reversed.
3. Do not move the print head manually. Forcing it may damage the Printer.
4. Raise the inner side of the ribbon (the platen side) a little for easy  
   removal and/or installation.

When replacing a worn-out ribbon, use only the specified replacement ribbon 
(260-1424). Remove the old ribbon following the above procedure in reverse 
and replace it with the new ribbon.

(smm 07/26/93)