DMP 105  (260-1276)              Addendum              Faxback Doc. # 4302

Please make the following changes in your DMP-105 Operation Manual:

A. Page 4, item 1--change "Press the white dot" to "Press the side of the
   Switch marked 1".

B. Page 7, third checkpoint--change "Black Plastic Tube" to "Yellow Band".

C. Add the following note between steps 3 and 4 on page 12:

NOTE: Every time you replace the ribbon cassette, clean the two ribbon guide
posts (located at the left end of the carriage shaft) with a soft dry cloth."

E. Page 54, under "If you have problems..."-- for the symptom "Poor Print
Quality or Smudging on Paper", add the following statement as the last
question under "Inspection and Adjustment":

"Did you clean the ribbon guide posts when you replaced the ribbon cassette?
If dirty, remove the ribbon cassette and clean the ribbon guide posts with a
soft dry cloth."

(css 07/26/93)