DMP 2110 (260-2810) Settings Faxback Doc. # 4342 SW SYMBOL OFF ON Bank # 2 (S2) 1 Form Length 11" 12" 2 LF Pitch 1/6 1/8 3 1" Skip Not Valid 4 Buzzer Valid Not Valid 5 Character Set ASCII Tandy 6-9 International set 10 Not Used --- --- Function SW9 SW8 SW7 SW6 USA Off Off Off Off Germany Off Off Off On France Off Off On Off Norway Off Off On On Sweden Off On Off Off Denmark Off On Off On Finland Off On On Off Italy Off On On On Spain On Off Off Off England On Off Off On Belgium On Off On Off Holland On Off On On USA On On Off Off USA On On Off On USA On On On Off USA On On On On Bank # 3 (S3) 1 Mode TANDY IBM 2 Processing DP WP 3 Character Set TRS IBM-1 4-6 Character Style 7 NL/CR CR+LF CR 8 LF/NL LF CR+LF Function SW6 SW5 SW4 Standard-10 Off Off Off Standard-12 Off Off On Condensed-16.7 Off On Off Correspond-10 Off On On Correspond-10 On Off Off Correspond-12 On Off On Proportional On On Off Proportional On On On Bank # 4 (S4) Print Correction Switches The print correction switches (S4) on the control PCB are set to the proper position before the printer is delivered. If the print position shifts horizontally after the user changes the carriage motor or print head, set the switches again. NOTE: Refer to the service manual, page 6, for proper adjustment of the print correction switches. The replacement of the carriage motor or print head should not be performed unless you have a service manual available. (css 07/26/93)