DWP-410  (260-1250)         Control Codes              Faxback Doc. # 4373

DEC.      HEX.              FUNCTION

08 n      08 n              Backspaces n number of micro-spaces (1<n<255)
10        0A                Line Feed *
13        0D                Carriage Return with Line Feed **
14        0E                End Underline
15        0F                Start Underline
27 00     1B 00             1/120" Space
27 01     1B 01             1/60" Space
27 02     1B O2             1/30" Space
27 03     1B 03             1/20" Space
27 04     1B 04             1/15" Space
27 05     1B 05             1/12" Space
27 06     1B 06             1/10" Space
27 10     1B 0A             Reverse Line Feed *
27 14     1B 0E             12 Pitch Select
27 15     1B 0F             10 Pitch Select
27 17     1B 11             Proportional Space Select
27 21     1B 15             Start Carriage Return Only **
27 22     1B 16             End Carriage Return Only **
27 24     1B 18             Enters External Program Mode ***
27 25     1B 19             Exits External Program Mode ***
27 26     1B 1A             1/48" Line Feed
27 28     1B 1C             Half Line Feed
27 30     1B 1E             Reverse Half Line Feed

*   Line feeds may be sent from machine-language programs, but not from
    BASIC's LPRINT statement. See the Technical Information section of your
    computer owner's manual for details on sending line feeds.

**  Normally, CHR$(13) causes a carriage return plus a line feed. However,
    after a CHR$(27;CHR$(21) is sent, a CHR$(13) causes a carriage return
    only; CHR$(27);CHR$(22) causes a return to normal.

*** See EXTERNAL PROGRAM MODE section of this manual.

(css 07/27/93)