DWP 410  (260-1250)  Print Wheel Installation/Removal  Faxback Doc. # 4381

The DWP-410 package includes a Courier 10 Print Wheel which you will need 
to install it before printing. Furthermore, Radio Shack provides a number 
of different Print Wheels for printing different font styles, available 
from Consumer Mail.  These include:

Courier (10 pitch)                (260-1430)
Prestige Elite (12 pitch)         (260-1431)
Madeleine (Proportional Space)    (260-1432)
Cubic (Proportional Space)        (260-1433)
Tile Italic (12 pitch)            (260-1434)
OCR B                             (260-1435)
Letter Gothic (12 pitch)          (260-1436)
Cubic 15                          (260-1437)
Bold Proportional Space           (260-1439)

TO INSTALL THE PRINT WHEEL:

1. Remove the Ribbon Cartridge from the Carriage by gently lifting straight
   up.
2. Grasp the two green handles (which are closest to the platen) between 
   your thumb and forefinger and gently tilt the Carriage towards you.
3. Hold the Print Wheel by the green "hub." When the Print Wheel is proper-
   ly installed, the hub will be towards the paper.
4. Position the red dot (on the back of the Print Wheel, opposite the hub)
   so that it corresponds to and fits into the "open" notch. (Match the red
   on both the hub and the notch.)
5. Push down on the hub until the Wheel "clicks" into place. The green hub
   should be all the way "down".
6. Grasp the two green handles (which are closest to the Platen) between 
   your thumb and forefinger and gently tilt the Carriage down, and away 
   from you.
7. Replace or install the Ribbon Cartridge.

TO REMOVE THE PRINT WHEEL

1. Remove the Ribbon Cartridge.
2. Tilt the Carriage back as described above.
3. Grasp the green hub of the Print Wheel and pull up. Gently twist the 
   Wheel back and forth while pulling it up for easier removal.

(css 07/27/93)