DMP-132  (260-2814)            Self-Test              Faxback Doc. # 4426

The DMP-132 has a built-in self-test feature to check the print quality and
general printer operation before you begin using it.

Before running the self-test, be sure to load the DMP-132 with 10-inch paper
since the test prints from one end of the platen to the other.

CAUTION: Printing on the platen can shorten the life of the platen and the
print head.

TO RUN THE SELF-TEST:

1. Press and hold either the LINE FEED or NLQ switch. See "Printer
   Components."

2. Set the POWER switch to ON. Starting with the sound of the internal buzzer,
   the DMP-132 will print the ASCII 96 characters preprogrammed into the
   printer.

If you press LINE FEED, the self-test is performed in the standard font. The
correspondence quality font is used during the test when the NLQ switch is
pressed.

Printing continues until you press the ON/OFF LINE switch or paper end is
detected.

(abo-07/26/93)