DMP 440  (260-2808)             Self-Test              Faxback Doc. # 4456

Follow the steps listed below in order to perform a selftest on the DMP 440
printer:

1. Press and hold either the LINE FEED switch or NLQ switch. (See "Printer 
   Components.")

2. Set the POWER switch to ON. Starting with the sound of the internal 
   buzzer, the DMP-440 will print the ASCII 96 characters pre-programmed 
   into the printer.

If you press LINE FEED, the self-test is performed in the standard font. 
The correspondence quality font is used during the test when the NLQ switch
is pressed.

Printing continues until you press the ON/OFF LINE switch (or paper end is 
detected).

(abo-07/27/93)