DWP 220  (260-1278)        Tandy Control Codes         Faxback Doc. # 4460


DEC.     HEX.        FUNCTION

08 N     08 N        Backspace n/120" (1 < n < 255)
10       0A          Line Feed *
13       0D          Carriage Return with Line Feed **
14       0E          End Underline
15       0F          Start Underline
27 01    1B 01       1/120" Space
27 02    1B 02       2/120" Space
27 03    1B 03       3/120" Space
27 04    1B 04       4/120" Space
27 05    1B 05       5/120" Space
27 06    1B 06       6/120" Space
27 07    1B 07       7/120" Space
27 08    1B 08       8/120" Space
27 09    1B 09       9/120" Space
27 10    1B 0A       Reverse Line Feed *
27 14    1B 0E       12 Pitch Select
27 15    1B 0F       10 Pitch Select
27 17    1B 11       Proportional Space Select
27 21    1B 15       Start Carriage Return Only **
27 22    1B 16       End Carriage Return Only **
27 24    1B 18       Enters External Program Mode ***
27 25    1B 19       Exits External Program Mode ***
27 26    1B 1A       1/48" Line Feed
27 28    1B 1C       Half Line Feed
27 30    1B 1E       Reverse Half Line Feed
27 31    1B 1F       Bold Print On
27 32    1B 20       Bold Print OFF
27 56    1B 38       1/8" Line Feed


*   Line Feeds may be sent from machine-language programs, but not from         
    BASIC's LPRINT statement. See the Technical Information section of your 
    Tandy Computer Owner's manual for details on sending Line Feeds.

**  Normally, CHR$(13) causes a Carriage Return plus a Line Feed. However,
    after a CHR$(27);CHR$(21) is sent, a CHR$(13) causes a Carriage Return
    only; CHR$(27);CHR$(22) causes a return to normal.

*** See External Program Mode in the DWP 220 manual for further information.

(abo-07/27/93)