DWP 220  (260-1278)        Papaer Loading              Faxback Doc. # 4462

PAPER LOADING

You can use fanfold computer paper or single-sheet typewriter paper 
with the DWP-220.

If you're using fanfold paper, you'll find it most efficient to use the 
optional/extra DWP-220 Bidirectional Tractor Feed unit, Catalog number 
(26-1444).

MANUAL PAPER LOADING (FRICTION FEED)

1. Gently pull the paper bail away from the platen.

2. Set the platen pressure lever toward the rear side of the Printer (pres-
   sure ON).

3. Insert the paper behind the platen and turn the platen manually (turn 
   the paper advance knob) so that the paper advances past the card guide.

4. Set the platen pressure lever toward the front of the Printer (pressure
   OFF) so that the paper can move freely back and forth.

5. Align and position the paper at the left margin.

6. Hold the paper in position and move the platen pressure lever back to-
   ward the rear side of the printer (pressure ON). the paper will no 
   longer move freely.

7. Lower the paper bail so that it is against the paper.

8. Position the paper manually to the first line of printing by turning 
   the paper advance knob.

NOTE: If the Printer runs out of paper, no out of paper signal will be sent to
the computer; the Printer will continue printing on the platen If this 
happens, immediately turn the ON-LINE/OFF-LINE switch to OFF-LINE; after 
loading more paper, return this switch to ON-LINE.

(abo-07/27/93)