DWP 220  (260-1278)               Ribbon               Faxback Doc. # 4464

Replacement - Black Multi-Strike Cartridge (26-1299)

RIBBON CARTRIDGE INSTALLATION/REMOVAL

Radio Shack carries a ribbon cartridge for the DWP-220 which contains a
high-quality carbon ribbon (26-1299). You'll find that it's easy to install
and remove.

When the carbon ribbon runs out, the printer detects the end of the ribbon 
and stops printing.

TO INSTALL A RIBBON CARTRIDGE:

1. Before installing the cartridge, remove all slack in the ribbon by turn-
   ing the green knob on the cartridge in the direction indicated by the 
   arrow (counterclockwise).

2. Position the cartridge so that the ribbon slides into position between 
   the print wheel cartridge and the plastic card guide; the tabs on the 
   cartridge should line up with the green claws on the carriage.

3. Press down on the cartridge and snap it into place.

4. Turn the green knob on the cartridge 1/4 to 1/2 turn counterclockwise 
   until any additional slack in the ribbon has been removed.

TO REMOVE A RIBBON CARTRIDGE:

1. Gently press the green carriage clips away from the cartridge tabs.

2. Lift up on the cartridge. Be careful not to catch the ribbon on the 
   print wheel.

(abo-07/27/93)