DWP 220  (260-1278)              Self-Test              Faxback Doc. # 4465

Before using the DWP-220, you should perform the Self-Test to ensure that 
the printer is operating properly. Before running the Self-Test, you 
should load wide paper (15") into the Printer. To run the Self-Test, follow
the procedure listed below:

1. Set the Printer power ON/OFF switch to ON.
2. Set the ON-LINE/OFF-LINE switch to OFF-LINE.
3. Set the TEST switch (DIP switch No. 5) to ON.

To end the Self-Test, set the TEST switch (DIP switch No. 5) to OFF.

(abo-07/27/93)