DMP 2100P  (260-1274)           Self-Test              Faxback Doc. # 4548

The DMP-2100P has a built-in self-test feature which lets you check print-
ing quality and general printer operation before you connect the Printer 
to a Computer. This is a good time to check for proper Print Head adjust-
ment (printing neither too faint nor smudged) and smooth paper feeding.

The Self-Test includes the various printer font styles, print widths and 
intensities, underline, graphics characters, and even a dot graphics sample. 
Before running the Self-Test, be sure to load 15" wide paper into the 
Printer.

To run the Self-Test:

1. Plug the Printer into an AC power outlet.
2. Set the Power ON/OFF switch to ON.
3. Set the ON/OFF LINE switch to OFF-LINE.
4. Press the TEST switch.

The Printer will begin printing the printable characters in the ASCII set.

5. The Self-Test printing will stop when the:

* Self-Test has been completed. (58 lines)
* Printer cover has been opened.
* RESTART switch has been pressed.
* Out-of-paper condition has been detected.

(dtc-07/26/93)