DWP-210  (260-1257)              Hints                 Faxback Doc. # 4592

Using the DWP 210 with the TRS-80 Model II.

To use the DWP-210 with SCRIPSIT, type (at TRSDOS READY):

PATCH SCRIPSIT/SYS (R=175 B=22 F=0F C=FF)[ENTER]

You will also have to adjust the character width and the backspace distance. 
See the SCRIPSIT 2.0 reference manual for details.

Instead of the above procedure, users of SCRIPSIT 2.1 can use the PRTPCH 
program provided with it. Answer the prompts for the DWP-410 (this is 
code-compatible with the DWP-210).

TRSDOS-II Users:

To use SCRIPSIT, type (at TRSDOS-II Ready):

DO DWP410 [ENTER]

Several PATCH COMPLETE message will appear. To remove these patches so that 
you can use other printers,type:

DO UNDWP410 [ENTER]

NOTE: If you are using TRSDOS-II on a hard disk system, you will need to 
insert your SCRIPSIT installation diskette into Drive 0 before doing the 
above patches.

(dtc-07/27/93)