DWP 210  (260-1257)            Print Wheels            Faxback Doc. # 4598

Print Wheel Installation/Removal

The DWP-210 package includes a Courier 10 Print Wheel which you will need 
to install before printing. If you wish, you may purchase from Radio Shack 
a 12 pitch and/or Proportional Spaced Print Wheel for different printing
operations.

Check with your local Radio Shack Computer Center or store since we are
continually making more font styles available.

To install the Print Wheel

1. Open the Front Cover.

2. Remove the Ribbon Cartridge (If it is installed)

3. Pull the Wheel Lock Lever in the direction indicated by the arrow. The
   Wheel Holder will then open.

4. Drop the Print Wheel into its Holder. (Be sure the type characters are     
facing the paper.)

5. Gently push the Lock Lever in the direction indicated by the arrow until it  

   locks into place. The Wheel is set in position and ready to print.

To remove the Print Wheel:

1. Remove the Ribbon Cartridge.

2. Press the Wheel Lock Lever as described above.

3. Remove the Print Wheel.

NOTE: Replace the Print Wheel when any "petal" is broken or bent or when it 
becomes unusable for any reason.

(dtc-07/27/93)