DWP 2  (260-1158)               Ribbon                 Faxback Doc. # 4650

Multi-Strike 3 Pak (260-1419)
Nylon Cartridge (260-1449)

INSTALLING AND REMOVING RIBBON CARTRIDGE

1. Remove slack in the ribbon by turning knob on the Ribbon Cartridge. 
   insert the ribbon between the Ribbon Guide and the card holder.  Press 
   the ridges to make the Ribbon Cartridge tabs hold the Cartridge.

2. Make sure the ribbon cartridge is properly secured, Turn the ribbon feed  
   gear 1/4 to 1/2 turn until the ribbon clicks down.

3. To remove a Ribbon Cartridge, tilt the upper stopper to the left and open  
   the ribbon cartridge tabs slightly to the outside and you can easily lift   
   up the ribbon.


(smm 07/27/93)