DWP 2 (260-1158)   Installing and Removing Print Wheel  Faxback Doc. # 4655

Print wheels are available out of Consumer Mail.  Check Consumer
Mail catalog for availability.

INSTALLING PRINT WHEEL

1. Lift up the carriage with the green Ribbon Guide.
2. Lift up the green wheel knob and fit the Print Wheel onto the Setter,  
   making sure to match up the red marks.
3. Press the Print Wheel to "click" into place. The green knob should be 
   down.  After properly setting the Print Wheel, push in the Ribbon Guide, 
   use your fingers to hold the center.

TO REMOVE THE PRINT WHEEL

1. Pull up and lift off the Print Wheel while holding the green knob. 
Carefully store wheel in the print wheel case.

NOTE: Twist the wheel back and forth while pulling it up to make it lift 
off more easily.


(smm 07/27/93)