DWP 510  (260-1270)         Paper Loading              Faxback Doc. # 4659

You can use either fanfold computer paper or single-sheet typewriter paper
with the DWP-510.

If you're using fanfold paper, you'll find it best to use the optional/
extra DWP-510 Bidirectional Tractor Feed unit (260-1447).

PAPER LOADING (FRICTION FEED)

1. Gently pull the Paper Bail away from the platen.

2. Set the platen Pressure Lever to the rear position (pressure ON).

3. Insert the paper behind the Platen and turn the Platen manually (turn 
   the Paper Advance Knob) so that the paper advances past the Card Guide.

4. Set the Platen Pressure Lever to the front or the printer (pressure OFF) so
   the paper goes freely back and forth.

5. Align and position the paper at the left margin.

6. Hold the paper in position and move the Platen Pressure Lever to the 
   rear position (pressure ON). The paper will not move freely.

7. Lower the Paper Bail so that it is against the paper.

8. Position the paper manually to the first line of printing by turning the
   Paper Advance Knob.

NOTE: Be sure the Copy Control Lever is set to 1 unless you're using 
multiple form paper.  If no out of paper signal is sent to the computer; 
the Printer will continue printing on the platen. If this happens, immedi-
ately turn the ON-LINE/OFF-LINE switch to OFF-LINE; after loading more 
paper, return this switch to ON-LINE.


(smm 07/27/93)