DMP-310  (26-2876)   Turning the Printer On and Off   Faxback Doc. # 4713

Set the POWER switch on the back of the printer to | (on) to turn on the 
printer. If you connected the printer to a power strip, be sure the power
strip is turned on.

To manually pause printing, press ON LINE/OFF LINE so that the ON LINE 
indicator turns off. The printer can not receive information from the
computer when it is off-line. To resume printing, press ON LINE/OFF LINE so
that the ON LINE indicator lights.

To turn off the printer or to manually stop printing in case of an
emergency, set POWER to O (off). Any information in the printer's buffer is
lost. To begin printing again, you must send a new print request from the
computer.

NOTES:

* When you connect the printer to your computer, you must turn on the
  printer every time you turn on the computer. Turning the printer on and
  off, or leaving the printer off while operating the computer can cause
  the entire computer system to operate erratically.

* Refer to your computer's owner's manual for any instructions for turning
  on peripheral devices, such as printers. You might need to turn on the
  printer before you turn on the computer.

* When you turn off the printer, be sure you wait at least 3 seconds before
  you turn on the printer. Otherwise, you might damage the printer.

* When you turn off the printer, it loses any information stored in the 
  buffer. (The buffer holds information the computer has sent but the
  printer has not printed).

* If you turn on the printer when paper is in the paper-feed path, the
  printer automatically ejects the paper.

(dkh-07/27/93)