LP 1000  (260-2804)              Selftest              Faxback Doc. # 4731

1. TURN ON THE POWER. The Ready indicator flashes to indicate that the LP 
   1000 is warming up. After about 45 seconds the indicator stays lit, and
   the LP 1000 is ready to use.                                           

2. PRESS THE ON-OFF LINE SWITCH to set the LP 1000 off-line. Remember that
   when the LP 1000 is turned on, it is always on-line.                   

3. PRESS THE TEST SWITCH on the operation panel to print the summary sheet.
   The LP 1000 then prints out the following information:                 
               - Version Number of firmware ROM                           
               - Paper size set                                           
               - Usable memory capacity                                   
               - Explanation of current settings                          
               - Usable font names                                        
                - Record of controller errors                             
   If the buffer contains any print data, that data prints before the     
   information listed above.                                              

4. AFTER THE SELF-TEST, all mode settings except the font assignment and  
   font selection return to their default values.                         

5. TURN OFF THE POWER BEFORE connecting the LP 1000 to a computer.        
                                                                          
                                                                          
                           *********************                          
                           *   Summary Sheet   *                          
                           *********************                          
                                                                          
 1. SYSTEM CONFIGURATION                                                  
    Revision level                     TANDY Laser V X.X.X.               
    Paper size  Resident               LETTER                             
    Total RAM                          1536 KB                            
    Available RAM                      1258 KB                            
                                                                          
 2. DEFAULT VALUES                                                        
    Emulation                   (l)    TANDY DMP2110 DP                   
    Print Orientation           (2)    Normal Portrait                    
    Line Termination            (3)    CR=CR, LF=LF, FF=FF                
    Auto Wrap                   (4)    Enable                             
    Character Set               (5)    TANDY CHARACTER SET                
    Line Pitch                  (6)    6 LPI                              
    Font                        (7)    LETTER GOTHIC 10                   
    Nationality                 (9)    U.S.A.                             
    Addressable Area            (B)    Printable Area                     
                                                                          
 3. ASSIGNED FONTS IN SYSTEM                                              
    LETTER GOTHIC 12            (1)     ABCDEFGHIJKLMNOPQRST              
    LETTER GOTHIC 16.7          (2)     ABCD.......RST                    
    PRESTIGE ELITE 12           (3)     ABCDEFGHIJKLMNOPQRST              
    COURIER 10                  (4)     ABCDE FGHIJ KLMNO PQRST           
                                                                          
 4. HISTORY OF ERRORS                                                     
    No Errors.                                                            
                                                                          
(dkh-07/27/93)