2400 BPS Internal Modem  (250-3555)    Setup           Faxback Doc. # 4776

To use the modem, the computer must recognize it as part of the system 
configuration.  To do this, run the Setup program that came with the
computer.

In the Setup program, designate the modem as one of the COM serial ports and
switch the port to ON.

Some of the options you choose when creating your own autolog files will 
depend on the requirements of the host computer.

1.  Select Set from the Commands Menu.

    At the various dialog box prompts, choose the options that the host 
computer requires and that are compatible with the capabilities of you
modem.  If you are connected directly to another computer, continue at
Step 3.

2.  Select Call from the Commands Menu.

    At the Phone number: prompt, enter the host's telephone number 9 up to
    30 digits).  if you have an auto-dial modem, the number is dialed
    automatically when you execute the file.  For other modems, you must
    manually dial the host's telephone number immediately before executing
     the autolog file.

3.  Select the additional commands required by the host computer.

    For example, you host might require that you use the Send option on the
    Commands Menu to tell Telecom that you want to send either a string of
    characters or a break sequence to the host.

    Some host systems might require a break sequence to gain the attention
    of the system's computer.

    You might also need to use the Wait option so that DeskMate will wait
    for a response from the host computer.

4.  Select Execute from the Commands Menu to execute the new file.

    The terminal screen appears, and the communication process begins.

5.  When the communication process is finished, press ALT+C to return to the 
    Command screen.  Then, select Disconnect form the Options Menu to
    disconnect the communication process.

To save this autolog file, select the Save as option on the File Menu, and 
then name you file.  You can later execute this file by simply selecting the
Autolog option on the File Menu and choosing this filename in the Open File
dialog box.

You can disconnect automatically by ending your file with the Exit command.
You return to the desktop.

(dkh-07/28/93)