2400/9600 BPS Faxmodem  (250-3027)       Addendum      Faxback Doc. # 4866

USER'S MANUAL ADDITIONS: PLEASE READ FIRST!

Do not change your AUTOEXEC.BAT file to load POPPRINT and FAXMAN
automatically. During installation, MTEZ tells you how to do this, but
we advise NOT doing this, because then you will not be able to receive
a data call. Instead, follow the directions in the manual to load
FAXMAN from your \MTEZ directory when you are ready to send or receive
faxes.

TO RECEIVE DATA AFTER FAXING: You have to tell your modem to receive
and send data rather than faxes. If you are going to enter host mode to
have your modem answer data calls automatically, make sure you do not
load FAXMAN. If you have loaded FAXMAN, unload it with the following 
procedure: From the \MTEZ directory type FAXMAN /R then press the ENTER key. 
The command should look like:

     C:\MTEZ>FAXMAN /R

SETTING UP YOUR SYSTEM FOR DATA COMPRESSION: For the highest speed file
transfers, your modem can provide V.42bis data compression. You need to tell 
your software it can use this feature.

1) Follow the installation instructions in you MTEZ software manual.
2) This will load MTEZ for configuration.
3) From the Main Menu, choose Change, then choose Setup (or hold down
   the Alt-key and press S).
4) From the Setup menu, use the Tab and arrow keys to highlight
   "Dial EC Level".
5) Press the space bar to toggle this area to read V.42 bis.
6) Use the down arrow to highlight "Answer EC Level".
7) press the space bar to toggle this area to read V.42 bis.
8) Press the F10 key to save the change.

Note: If the V.42bis choice does not appear, use the Tab key to select
      Modem Type. Press the F2 key to choose your modem and press the
      ENTER key to accept the choice. Then setup V.42 bis as above.

(dtc-07/28/93)