1200 BPS Internal Modem (250-3510A)    Installation    Faxback Doc. # 4928

1. Turn off the 1400 Laptop Computer and any peripherals connected to it.
   Disconnect any cables from the computer.  Position the computer so that
   the rear side is facing you.

2. Remove the two small Phillips screws that hold the cover plate in place
   over the modem option slot and remove the cover plate.  Store the cover
   plate in a safe place in case you ever remove the modem.

3. Insert the modem into the expansion slot, carefully sliding the printed
   circuit card edges into the card guides.

NOTE: The modem components must be facing upward (toward the top of the
computer).

4. Press the card in gently until its connector is fully seated and the
   modem's rear panel is resting against the metal rear panel of the
   computer.

5. Secure the modem with the two Phillips screws previously removed.  The
   computer is now ready to use, along with the internal modem.

6. Removal: If for any reason you remove the modem, be sure to cover the
   opening with the cover plate.  Secure the cover plate with the screws.

(css 07/28/93)