120 MB Smartdrive (250-4127) Configuring the Drive Faxback Doc. # 5062 After all internal options are installed in the computer, you must run the computer's setup utility to reconfigure the system for the options. Use the setup utility to configure the drive as a non-standard or standard drive. To configure the drive as a non-standard drive, enter the following information when running the setup utility: Cylinders [872] Heads [8] Head Landing Zone [0] Sectors [35] If your system setup has an IDE option or supports a drive type definition option, use one of those options. Refer to your computer user's guide for specific information about the setup program. If your system setup utility does not support a drive type definition options, then select any drive type that does not exceed the total number of sectors of your drive. To calculate the total number of sectors for a given drive type, multiply the sectors per track by the number of heads by the number of cylinders. The following is an example of a drive type and the information displayed during setup: Type 9 900 cylinders 15 head 17 sectors Type 9 has 229,500 user sectors. It does not exceed the number of user sectors of the 120MB drive. Your computer dealer will calculate the sectors and configure the drive for you if you choose not to do so your- self. (smm 07/29/93)