2400 BPS Internal Modem  (250-3538)   Installations    Faxback Doc. # 5101 

INSTALLING THE MODEM

The following steps explain how to install the modem in your computer.
Follow these instructions carefully.

CAUTION:  Before installing or removing boards in your computer, be sure to 
remove power from the computer.  Never insert or remove the modem with the 
power turned on.  Disconnect all power cords.  Be sure to disconnect the 
telephone cable from the modem and remove any diskette from the computer.

1.  Turn the computer so the computer's back panel faces you.

2.  Open the back cover and remove the top cover.

3.  Disconnect and remove the internal battery.

4.  Remove the three screws that hold the top and rear metal covers in place.

5.  Insert the supplied flat cable in the cable connector inside the computer
    with the colored stripe facing you.  When properly seated in the 
    connector, the colored stripe is not visible.

6.  Thread the flat cable through the back opening.  Do not twist the cable.

7.  Press the cable into the modem's connector.  When properly seated in the
    connector, the cable's metal contacts are barely visible.

8.  Slide the modem into the computer, guiding the flat cable so that it 
    folds under the modem.  Align the modem bracket holes with the holes on 
    the computer's back panel.  Secure the modem with the screws removed in 
    Step 3.

9.  Secure the top metal cover in place and replace the top plastic cover.

10. Replace and reconnect the internal battery.

11. Plug your telephone cable into either of the modular connectors on the 
    back of the modem.  You can plug a telephone into the other jack.

(abo-07/28/93)