WP-101  (260-3970)      Installing The Battery        Faxback Doc. # 5188

Card Memory: 260-3971
Battery: CR2016--available CMC for memory card

Battery: CS-0245
         CR2450-HE4 Sony for WP

If Card Battery Low appears during any card memory operations, the card
battery is nearly drained. Replace the card battery before you lose the files
in the card memory.

1. Be sure to turn on the WP-101.
2. Insert the card memory into the card memory slot.
3. While holding the card memory in place, pull out the battery holder.
4. Remove the old battery from the from the battery holder.
5. Install a new battery with its plus side facing up.
6. Carefully insert the battery holder into the card memory.

CAUTION: Never remove the battery holder without first turning on the WP-101
         and inserting the card memory into the card memory slot. If you
         remove the battery holder without inserting the card memory into
         the WP-101 is not turned on, all of the files stored on the card
         memory will be lost.

You can expand the WP-101's memory capability by inserting a card memory
(260-3971) into the card memory slot on the left side of the WP-101. You can
store files on it. Then, you can remove the card and keep it in a safe place.

(css-08/04/93)