9600 BPS Faxmodem  (250-3029)      Configuration       Faxback Doc. # 5217

STANDARD CONFIGURATION

For most asynchronous and synchronous operations, you won't need to change 
any settings. The factory default configuration should work for the vast 
majority of users. Speed, compression, and error correction are 
automatically negotiated.

If your fax/modem is not communicating properly using the factory default
settings, particularly if it is unable to connect to another modem that you
know does not support error correction and/or data compression, you may need 
to force your fax/modem into a particular mode that matches the requirements 
of the remote modem, as referred in the section below.

If you've changed any settings, you can return to the factory default 
settings at any time by typing AT&F and pressing the Enter key.

OTHER CONFIGURATIONS

You can force your fax/modem to communicate in various ways by using special 
AT command strings or dial prefixes. If you are having trouble connecting 
with non-error-correcting modems, for example, you may need to use this tech-
nique.  Refer to pages 11-7 and 11-9 in Chapter 11, "Troubleshooter's Guide," 
for details.

(dtc-07/29/93)