CDR-1501  (250-1091)     Using The Control Panel       Faxback Doc. # 5278

Follow these steps to use the TCDP.EXE control panel.

1. Go to the drive and directory where the program is stored and type: tcdp
   Then press <ENTER>. The control panel appears.

2. Enter the command n one of the following ways:

* Click on the correct icon with the left mouse button.
* Use the cursor keys (up, down, left, and right arrow keys) to move the
  cursor and highlight the correct icon. Then, press <ENTER>.
* Press the correct letter on the keyboard. The letter you can press to
  enter a command appears in parentheses in the command descriptions.

Play--Use before or during play to begin play at the beginning of the
current track.

Pause (P)--Use to pause play or to resume play at the point reached when you
paused play.

Start/Stop (S)--Use to start play at the beginning of the track or to stop
play.

Play Previous Track (B)--Use during play to begin play at the beginning of
the previous track. Use before play at the beginning of the previous track.
Use before play to select the previous track.

Notes:

* Play Previous Track does not work during Pause. Although the track
  indicator changes, play resumes at the point reached when you paused.
* If the current track is the first track on the CD, Play Previous Track
  selects the last track on the CD.

Play Next Track (N)--Use during play to begin play at the beginning of the
next track. Use before play to select the next track.

* Play Next Track does not work during pause. Although the track indicator
  changes, play resumes at the point reached when you paused.
* If the current track is the last track on the CD, Play Next Track selects
  the first track on the CD.

Reverse (R)--Use during play to replay the previous 15 seconds of the
current track.

Note: If you use Reverse during the first few seconds of a track, play might
pause. If this happens, use Play or Pause to resume play.

Forward (F)--Use to skip the next 15 seconds of the current track.

Note: If you select Forward during the first few seconds of a track, the
drive might pause. If this happens, use Play or Pause to resume play.

Eject (E)--Use to stop play and open the disc tray or to close the disc tray.

3. Press ESC or Q to stop using the control panel.

Using the DOS Line Commands:

Follow these steps to use the TCDP.EXE line commands.

1. Go to the drive and directory where the TCDP.EXE program is stored.
2. Type tcdp
3. Press the <SPACEBAR>.
4. Enter the appropriate command, as shown below:

+ (Play Next Song)--skips to the beginning of the next track during play. If
  you are playing the last track, the + command skips to the beginning of
  the first track.

- (Play Previous Song)--skips to the beginning of the previous track during
   play. If you are playing the first track, the - command selects the last
   track.

S (Start/Stop)--skips to the beginning of the first track or stops play.

P (Pause/Unpause)--pauses or resumes play.

# (Start Song Number)--begins play at the beginning of the specified track.

5. Press <ENTER>.

Viewing the TCDP.EXE Help Screen:

To display the TCDP.EXE commands, at the DOS prompt, type: tcdp? Then, press
<ENTER>. The following help screen appears.

    Usage:  TCDP  [ + - s p # ? ]

Options       +or-   Play next or previous song
              s     Start/stop
              P     Pause/unpause
              #     Start song number #
              ?     This help screen

If no option is used, a control panel is displayed which uses these active
keys:

              s     Start/stop
              P     Pause/unpause
             f/r    Fast forward/reverse
             n/b    Next song/back one song
           ESC/q    Quit
          arrows    Select buttons
<ENTER>/<SPACEBAR>  Activate button

(dtc-08/02/93)