Serial Mouse  (250-1040D)       Drivers                Faxback Doc. # 5331

RUNNING THE MOUSE DRIVERS UNDER MS-DOS

If necessary, copy the two mouse drivers from your MS-DOS diskette to your
working diskettes or hard disk.  The drivers are:

MOUSE.COM and MOUSE.SYS

MOUSE.COM is the standard driver.  To unload it, it must be in your current
directory or in a directory in your system's PATH. Simply type:

MOUSE <ENTER>

(You can include this in the AUTOEXEC.BAT file.)

MOUSE.SYS is the alternate device driver.  It conforms to the DOS standard
for installable device drivers.  To use MOUSE.SYS, add the following line to
your computer's CONFIG.SYS file:

Device=C\dir\MOUSE.SYS

(dir is directory where your MOUSE.SYS driver is located.)

For more information about CONFIG.SYS, AUTOEXEC.BAT, and PATH, refer to your
DOS reference manual.

With some versions of MS-DOS, you can adjust your mouse's sensitivity and set
other mouse options.  Refer to your DOS reference guide for specific infor-
mation on the mouse driver included with your system.

(css 07/30/93)